NO PICS,,,NEVER HAPPENED

[woody31]

I want to start a new thread,,no pics,,,never happened,,,
a place to show off your work,,your big fish you caught,,your time slips from the drag races,,mud bogs,,ect,,ect,,,keep it clean,,,safe for work and kids please,,ill get things started,,,remember ,,,no pics,,never happened.
been working on my radio swap,,got it all apart,,except for the elusive adapter,,it has not been too bad,,,here goes,,,see if this works,,,

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[Ruger_556]

Workin' for my dad on the weekend

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Electrical stuff at my real job... $1000 fuse block someone destroyed with a test light

You must be registered for see images attach

Broken headlight wire on a Freightliner. Tucked in the wire loom between the engine mount and frame rail. Someone pierced the insulation while testing and the wire corroded off.

You must be registered for see images attach

Re-wiring the headlight buckets on the same truck

You must be registered for see images attach

You must be registered for see images attach

The "fix" from the previous mechanic for the broken wire

You must be registered for see images attach

Wiring in GPS trackers

You must be registered for see images attach

Making a good fuel pump out of two

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

A/C wiring for a Kenworth T2000 someone had reversed the connectors in the dash

You must be registered for see images attach

Little painting project...

You must be registered for see images attach

You must be registered for see images attach

... and my work box

You must be registered for see images attach

 

[Ruger_556]

Fixed the amber strobes on this BNSF truck... More aftermarket wiring than OEM ford in this truck. I liked how they setup the power distribution block so much I'm going to do exactly the same in my truck

You must be registered for see images attach

You must be registered for see images attach

Restored a 1950 John Deere "A"... Took every part down to bare metal. It was a box of parts senior year of HS.

You must be registered for see images attach

You must be registered for see images attach

Propane truck with inop strobes... Flick the switch on and one bursts into flames. I found the problem!

You must be registered for see images attach

Building a flatbed truck for a local farmer

You must be registered for see images attach

You must be registered for see images attach

Torched the bed and hinge assembly off this donor truck... Rust got between the frame rails (Doubled frame) and buckled them.

You must be registered for see images attach

Working on an Allison transmission

You must be registered for see images attach

 

[Ruger_556]

Ever wondered what a trailer ABS valve looks like inside? Rubber seals hardened up and leaked in this one.

You must be registered for see images attach

Building a loading dock

You must be registered for see images attach

Tore apart a failed automatic slack adjuster and found the teeth worn out of the clutch

You must be registered for see images attach

You must be registered for see images attach

Doing a little repair welding

You must be registered for see images attach

You must be registered for see images attach

 

[woody31]

thanks for the pics,,you are one busy dude...

 

[98_k1500]

You must be registered for see images attach

Just change the belts on the cummins they said. It will be fun they said...

 

[Ruger_556]

Diagnosed a shorted air solenoid in this Volvo air solenoid pack. Measured aprox. 1.6 ohms... No spec of course (Damn Volvo engineers) but the replacement was 18 ~ ohms. Found that the solenoid had leaked (Made of thermo-injected plastic so you wouldn't expect it to leak) and had corroded from the inside out.

You must be registered for see images attach

I've somehow become the APU tech at work... ThermoKing Tripac with an Ingersoll engine had a fuel leak. Plastic supply line rubbed through on a steel injection line between the filter and pump.

You must be registered for see images attach

Updating the service brake valve on the side of the road...

You must be registered for see images attach

Flying to Phoenix for a refrigeration class

You must be registered for see images attach

 

[phule]

Not even kidding your post makes my job seem very unappealing . Your a busy guy. Nice work

Adam

 

[98_k1500]

Yea, i think my little ol post got lost in all that.

 

[Ruger_556]

thanks for the pics,,you are one busy dude...

I can be at times

You must be registered for see images attach

Just change the belts on the cummins they said. It will be fun they said...

is that in a bus? Those can be miserable...

Not even kidding your post makes my job seem very unappealing . Your a busy guy. Nice work

Adam

Yea, i think my little ol post got lost in all that.

I dug it up for you... I did kind of bury it.