New K2500 owner from Sweden!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

RyanMerrick

8 Lug
Joined
Aug 14, 2012
Messages
1,245
Reaction score
72
Location
CHICAGO
Thank you!

Actually in sweden the gmt400's are the most common of the american trucks. But you are right, they are not in overflow :)

There are firms in town that imports parts.

As a comparison.
Outer tie rod end in sweden would cost the equivalent of 32$, a part that is listed as 9$ on rockpartsauto.com
So it's not difficult, just expensive :)

But it works fine ordering from eg. rockparts too :)

Interesting, I didn't realize the GMT400 was exported at all
 

Uffeeh

Newbie
Joined
Sep 21, 2012
Messages
22
Reaction score
0
Location
Linköping, Sweden
Thanks everyone!

I thought that the truck felt "nervous" on the road so i lifted the front and realized that all tie rod ends, pitman arm & idler arm were worn. And even the bushings in the upper wishbone.
So i placed an order to rock auto and $300 later i have all the parts to make a fun weekend :)

I have replaced the broken lightbulbs so now i have pretty decent lights when the dark season is beginning! :)

Low beam + 50w HID high beam
3x 100W front and 5x 55W on the roof :D
You must be registered for see images
 
Top