TruckinAin4Sissies
L.E.D. Whisperer
Here's how I increased the signal from my Keyless entry remote 7x!
I could only lock/unlock my truck from ~5 feet. Now I can do it from 35 feet away.
Items needed:
Soldering iron
Solder
~4" wire
Here's the average distance for the factory remote (in my case).
The FCC has a maximum signal output that the manufacture must abide buy. Well, like Bieber F 'em!
Process:
Use a flat screwdriver to separate the two halves of the remote
The 2 halves & the buttons were little dirty.... Clean 'em up.
Grab your Soldering iron, solder & a short piece of wire.
Solder the wire to the area pictured.
Route the wire like this.
Put the two halves back together and test it out.
Any questions?
I could only lock/unlock my truck from ~5 feet. Now I can do it from 35 feet away.
Items needed:
Soldering iron
Solder
~4" wire
Here's the average distance for the factory remote (in my case).
You must be registered for see images attach
The FCC has a maximum signal output that the manufacture must abide buy. Well, like Bieber F 'em!
You must be registered for see images attach
Process:
Use a flat screwdriver to separate the two halves of the remote
You must be registered for see images attach
The 2 halves & the buttons were little dirty.... Clean 'em up.
You must be registered for see images attach
You must be registered for see images attach
Grab your Soldering iron, solder & a short piece of wire.
You must be registered for see images attach
Solder the wire to the area pictured.
You must be registered for see images attach
Route the wire like this.
You must be registered for see images attach
Put the two halves back together and test it out.
Any questions?