Stepbyrd
Latest activity Postings About
-
-
Stepbyrd replied to the thread Humming on deceleration.Yes, I removed the driveshaft making sure to mark it‘s orientation. The u-joints held their position (no flop) and moved smoothly. Caps... -
Stepbyrd replied to the thread Humming on deceleration.Well, pinion nut was as loose as a goose. Once I got everything cleaned off the rear yoke, I saw that there was only one thread showing...
-
If you are going to replace the pinion bearings I would recommend using a pinion spacer set over a crush collar. USA Standard Gear part...
-
If you have play, tightening the pinion nut is not the fix. This is the problem with crush sleeves - with wear they crush further. Your...
-
Stepbyrd replied to the thread Front Diff and Suspension issues.Update: Just to close the loop for others who may run across this. Shop is giving me hell saying that there is no problem. It’s right...
-
-
Stepbyrd replied to the thread Humming on deceleration.Ok, so u-joints appear and feel ok. Tight but not overly so. Nice and smooth movement. Pinion.....well let's just say it ain't good. It...
-
Stepbyrd replied to the thread Humming on deceleration.I’ll check that this weekend. As far as the fluid goes I don’t remember what I used specifically but I do remember it said no additives...
-
99 K1500 Suburban 5.7L GU6/G80 Rear I swear, I fix one thing on this truck and two other things pop up. Trucks been inop for the past...
-
-
Loading…
-
Loading…
