dcp1992
Instagram - @dcp1992
I've followed this page for a long time now, and I'm ready to chime in. I've got a 95 c1500 with a 3" BL. Running 31x10.5x15 on vision warrior 375. I just ordered the 4" spindle lift as well as the entire front end rebuild minus control arm bushings. New brake rotors and new shocks all the way around. Wondering what would be a good tire size to run. Could I run a 35" AT? If I do I will definitely want to regear.You must be registered for see images attachYou must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
I have 4" lift spindles with a 2" coil spacer and I can run 35's (though about 1/2 way worn) without much problem so with 4" spindles and 3" body I'd see no problem.
Also, I've had them on for over 6 months with stock 3.43 gears and it seems to run fine. I can go 60-80 on the highway comfortably without the truck struggling. I'd still not drive it like a race truck though. I do have a rear axle out of a 2000 GMT400 Denali that has 3.73 in it to swap over when I get my rims in so I'd be able to tell you the difference after I get it installed over the next couple weeks.