seedcleaner
Newbie
Working on an auto 1997 k3500. After installing 2000 7.4l engine, and rebuilt tranny with a 1996 engine harness, I didn't have speedometer working. I assumed it was a wiring issue from the new 7.4 and 1996 wiring. I would put the truck in gear, with no rear driveshaft, and the speedo didn't register.
I put that issue on the back burner to focus on other things. In doing so, I finished some items and installed driveshaft to take it for a spin. Speedo works now. Is it possible the speedo is getting a reading now from wheel sensors instead of the transfer case? I could try to confirm all of this by removing driveshaft and seeing if speedo quits again, but asking here would be easier!
Thanks!
I put that issue on the back burner to focus on other things. In doing so, I finished some items and installed driveshaft to take it for a spin. Speedo works now. Is it possible the speedo is getting a reading now from wheel sensors instead of the transfer case? I could try to confirm all of this by removing driveshaft and seeing if speedo quits again, but asking here would be easier!
Thanks!