Nice Overhead Console and Compass/Temp mirror

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

1993GMCSierra

I'm Awesome
Joined
Aug 1, 2012
Messages
385
Reaction score
11
Location
Surry, VA
Interested in the console, shipped to 23883.

Is there a How-to thread on how to mount it/wire it all up?

Adding screws so close to my roof scares me a bit.
 

outalne94z71

Bouncing Truck Maker
Joined
Feb 29, 2012
Messages
2,055
Reaction score
46
Location
watertown, wi
Interested in the console, shipped to 23883.

Is there a How-to thread on how to mount it/wire it all up?

Adding screws so close to my roof scares me a bit.

you have a reg cab you need to cut square holes on the inner layer of the roof panel for the back end and 1 screw up front, then you can tap into the power from the dome light
 

Tony_SS

I'm Awesome
Joined
Oct 22, 2011
Messages
762
Reaction score
3
Location
Washington, MO
Interested in the console, shipped to 23883.

Is there a How-to thread on how to mount it/wire it all up?

Adding screws so close to my roof scares me a bit.

Its only one screw and there is already a hole up front... no drilling.... just cut thru the headliner in 2 spots and you'll see the 2 squares in the rear and hole up front. Very easy. there are install threads I believe.... I tapped into the overhead dome lights already up there and just 2 wires. Best of all this console is out of a Silverado... not a Tahoe or anything.

$65 shipped for the console.
 

Tony_SS

I'm Awesome
Joined
Oct 22, 2011
Messages
762
Reaction score
3
Location
Washington, MO
you have a reg cab you need to cut square holes on the inner layer of the roof panel for the back end and 1 screw up front, then you can tap into the power from the dome light

Really? I thought they all had the 2 rear square holes already.
 
Top