Okay i need help, i have a 1989 chevy and i bought an HID kit with the bulb size 9006 i think. One of my headlights was out from the drivers side so i just figured id install the HIDs since there plug n play. when i installed them they didnt turn on and when i put the stock bulbs they didnt turn on either, need help!
Newbie needs help!
- Thread starter jr817
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
hiredgun8
I'm Awesome
The HID's would require a ballast to work. If you bought them as a PnP kit they should be with them.
As for your stock lamps not working after you tried the HID's...Check your fuses...it likely blew it if you tried the HID's without a ballast.
As for your stock lamps not working after you tried the HID's...Check your fuses...it likely blew it if you tried the HID's without a ballast.
Vortec Lover
Behold the Beast
90% of these problems can be solved by wiring correctly... the other 10% are from bad fuses or bulbs.
badazzbulldog
I'm Awesome
reverse the truck side headlight plug(unplug from ballast and turn it 180 and plug it in light should come on)
