Got it running this morning and nothing changed as i suspected after getting a good steady vacuum reading.
Next weekend ill be taking the upper intake off and check the injectors as well as the valve covers and make sure all valves look to be operating properly
I did however get new Electric fans installed. Flex a Lite kit made for our trucks. The actual installation is not too hard and finished it up this morning and seems to be working good at keeping it cool. Hard to know for sure as highs are still in the 30s.
I also had about 30ft of some 2 size welding cable so it was time for a cable upgrade. Battery was 6yo Walmart that was getting weak but still working so a new battery and converted to top post.
When starting it spins over much faster now. I have enough wire left to run from the fuse connection by the battery to the fuse box on the drivers side.
Next weekend ill be taking the upper intake off and check the injectors as well as the valve covers and make sure all valves look to be operating properly
I did however get new Electric fans installed. Flex a Lite kit made for our trucks. The actual installation is not too hard and finished it up this morning and seems to be working good at keeping it cool. Hard to know for sure as highs are still in the 30s.
I also had about 30ft of some 2 size welding cable so it was time for a cable upgrade. Battery was 6yo Walmart that was getting weak but still working so a new battery and converted to top post.
When starting it spins over much faster now. I have enough wire left to run from the fuse connection by the battery to the fuse box on the drivers side.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach