Iowa

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

tylers88

I'm Awesome
Joined
Nov 20, 2010
Messages
364
Reaction score
6
Location
Clarion, IA
Hey from Iowa. I have an 88 RCSB 4x4 (kind of) with a 350, black with maroon interior.
 

Greg

Über Mod
Supporting Member
Joined
Dec 2, 2009
Messages
3,563
Reaction score
111
Location
South Dakota
Hey man, welcome to the site from the GMT400 staff. Where are you at in Iowa? I am in SE South Dakota.
 

tylers88

I'm Awesome
Joined
Nov 20, 2010
Messages
364
Reaction score
6
Location
Clarion, IA
front d shaft out until i get an idler arm and pitman arm, because 4 wheel drive makes me go retarded some times and steering needs to be fixed first
You must be registered for see images

last winter before 285s, blocks and new headlights
You must be registered for see images

stuffing 285s, whips back on
You must be registered for see images

cranked bars + blocks

I need to rebuild the front end, or make it safe to drive until future plans start going together and it needs cab mounts other than that its good to go to DD it safley. really could use a box(looks like the ocean) and differant fenders(non-GM, ****** fit) I do have good doors and a good hood for when it gets blow apart again. I would like to get the body stait and stuff a 10 bolt or D44 under the front as I would just run 35's so no real need for a 60 and a 14FF
 
Top