monstar_est87
I'm Awesome
And wars all this about an nbs master cylinder..? Wats wrong with stock..?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
And wars all this about an nbs master cylinder..? Wats wrong with stock..?
And wars all this about an nbs master cylinder..? Wats wrong with stock..?
you just need the lines for it to run from power steering pump, and if you have a factory non hydro pump then ive heard just use a T for the return low pressure side from the hydroboost unit and tap it into the power steering return line with some barb fittings and clamps.
the only line i have not been able to find is the cooling line! i took a hydroboost cooling fin from a nbs truck since all the OBS ones where rusted and just looked like crap and id wouldnt really trust them. but i just cut the lines on mine. i think i can just put it inline with the return but not positive.
ive heard some people say the cooling isnt needed, and some say it should be.... i figure since it had a cooler from factory then its probably needed.
best place for pics would be lmctruck.
http://www.lmctruck.com/icatalog/cd/865w/0116.jpg
lmc has the cooling lines, both styles