Getting ready to swap need INFO!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

94rbp1500

Newbie
Joined
Apr 14, 2012
Messages
20
Reaction score
0
Location
pittsburgh
I have a 96 ext cab z71. It currently has 350/4l60 with the push button 4x4. I have a 5 speed swap im about to start. Trans is from a 93. In the last couple days either the actuator or the tcase went. Not sure which. I have 4low but it wont go 4hi and occasionally gets stuck in neutral trying to change. so, I just wanted to see what all I need to know before I start the swap, and if I can swap to a different tcase and eliminate push button.
 

94rbp1500

Newbie
Joined
Apr 14, 2012
Messages
20
Reaction score
0
Location
pittsburgh
found a cheap 241-c tcase. Can anyone tell me if i can use it and what else i'd need to swap before i buy it?
 

Horns

Tiff's Wedding Crasher
Joined
Apr 24, 2010
Messages
15,326
Reaction score
152
Location
Iowa
What did the 241 come out of?
 

Horns

Tiff's Wedding Crasher
Joined
Apr 24, 2010
Messages
15,326
Reaction score
152
Location
Iowa
94 silverado i believe

Then it will bolt right up as long as the NV3500 has the 4x4 tail shaft.

Remember you'll have to cut a hole in the floor as the 241 is floor shift. You'll also need to get the actual shifter and linkage.

-Sent from my twin turbo Desire using diesel fuel.-
 
Top