Clutch engages at the floor.

[yeahitsbrown]

So I took my truck for a short drive yesterday and now the clutch engages at the floor. Sometimes to the point of not being able to put it into gear. I popped off the slave inspection cap and I have plenty of travel. Any ideas? It was just fine yesterday.

Sent from my 831C using Tapatalk

 

[TXVortec454]

I have no experience with an OBS clutch, but I would look at the clutch pedal, bracket, and related linkages. If anything is causing a bunch of slack it could cause the problem you're experiencing. On my brother's Mazda truck, the clutch pedal bracket broke at the pivot point causing the same problem you have.

 

[inthechateau]

Do yo have all free play until that point in pedal? Have someone push the pedal while you watch the slave actuate. If pedal travels all the way down until the slave starts to move you have leaking/bad clutch master cylinder. Is fluid up to level?