can i see some angles on rcx 4"

[JAW's]

speak laymans terms here bud

 

[WFO4X4]

excentrics are the little discs that you turn to give pos or neg camber.

 

[JAW's]

huh... where are these located.... I cant get the top of the tires out enough because the I am at the end of the slots that the UCAs sit in.

 

[WFO4X4]

the UCA bolts on using the camber excentrics. look like washers that are offset from the middle of the screw.

 

[JAW's]

ah gotcha... Like I said im maxed out in my slot

 

[WFO4X4]

how high is your lift? cause i'm around 7 and it just maxed out.

 

[JAW's]

... not a true lift. I did torsion bar keys and blocks.
but its about 3 give (take a bit if anything) in front and 2 in back.

 

[JAW's]

guy who did it said my bars were cranked to far to give him room??... maybe i should crawl under there to check and see how everything looks again

 

[WFO4X4]

... not a true lift. I did torsion bar keys and blocks.
but its about 3 give (take a bit if anything) in front and 2 in back.

then you shouldn't be maxed out unless something else is off

 

[JAW's]

then you shouldn't be maxed out unless something else is off

any ideas on what this something could be... Thanks a lot. Sorry for all the stupid questions

Also , any ideas what alignment specs should be running a 305/70/16 on a 16x10 wheel.