Eveready
I'm Awesome
Looks like a good job of installing. Did you get a pro to do it or is it a DIY? I rate stuff like this by how much better it looks than my truck and by that measure you are way ahead! Good job.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I did it myself. Wasn’t very difficult. Thanks for the compliment.Looks like a good job of installing. Did you get a pro to do it or is it a DIY? I rate stuff like this by how much better it looks than my truck and by that measure you are way ahead! Good job.
I did it myself. Wasn’t very difficult. Thanks for the compliment.
I did it myself. Wasn’t very difficult. Thanks for the compliment.
Yes it’s LMC. On the back the old vinyl cover just unzipped and I put the new one on. On the bottom I left the vinyl underneath. The new covers have like 1/2” of foam glued to them. They come like that. The old cushion only had one small bad spot and I just jammed a little extra foam in that spot.You are welcome and well deserved. Is this an LMC cover or somewhere else? Also did you remove the old cover and did you need to do any repairs to the foam?
Thank youWell done!
I know this is a dated thread but thanks a TON for this. I'll be checking this out!! Hopefully they can still source these covers.So you all know how . No one has replacement seat covers for the 88-94 trucks / SUV . I found a place that sells them and just wanted to share this with everyone .
http://www.truckandcarshop.com/8898.html
You must be registered for see images attach