Hi all-
I have a 1996 k2500 7.4 big block vortec equppied truck that I am selling as I have little to no use for the truck anymore.
Clean title/ Bay Area: Asking 7500 OBO
Here are the main specs:
Nearly zero rust truck as its a CA truck
265k miles
Truck driven less than 5k a year since I owned it
480Le tranny with recent fluid change
new braided brake lines and front stoptech rotors/ pads and calipers
Blackbear Tune
Volant intake
Magnaflow muffler dual in dual out
TB Spacer Airraid
New in box not installed JBA ceramic header CARB Approved
4.10 gears
Rear axle fully rebuilt with new seals and detroit tru trac and new gears about 2 years ago
New air lift bags from firestone installed 6 months ago
1.5 rear block lift, 3 inch body, front 1.5 crank
Black paint was severly damaged when bought so its been bedlined with rustoleum bedliner for easy touch up and coverage... satin black color
bed has been bedlined with rustolem and has plastic liner
LED headlights and Taillights
10 inch sub with kenwood head unit with upgraded rear pillar speakers
interior in great shape/ gray with some slight cracks in dash
good neck/ 5th wheel brackets
new class V hitch
new valve cover gaskets and refinsihed valve covers
has some oil leaks from oil pan and slight leak from front diff
all new front suspension in last 4 months: all control arms bushings, TRE's, Steering braces from cognito, idler arm, pitman arm, upper custom control arms, ball joints... need an alignment (firestone lifetime) as my new upper adjustable arms are slightly too long (dont want to crank anymore) so I was going to shorten shank on joints but ordered 4 Metal Cloak joints to install and shorten if needed
all steering essentially new except was going to replace box with red head unit... power steering pump seems OK but steering box has some play (looks OEM)
New alternator replaced by previous owner
New fuel pump replaced by previous owner
4 new tires 315/75/16 and 4 new wheels
spare tire bfg in same size
new energy susp. tranny mount/ motor mounts in box need to be installed
New accel distributor, coil, ceramic plug wires and iridium plugs... last thing to do was to install new 4 hole bosch injectors but never got around to it
New-ish ranch rear shocks and skyjacker front shocks
4x4 works great
And more...
Please txt: 4 zero 4 - two 2 6 - 3 0 two 1
I have a 1996 k2500 7.4 big block vortec equppied truck that I am selling as I have little to no use for the truck anymore.
Clean title/ Bay Area: Asking 7500 OBO
Here are the main specs:
Nearly zero rust truck as its a CA truck
265k miles
Truck driven less than 5k a year since I owned it
480Le tranny with recent fluid change
new braided brake lines and front stoptech rotors/ pads and calipers
Blackbear Tune
Volant intake
Magnaflow muffler dual in dual out
TB Spacer Airraid
New in box not installed JBA ceramic header CARB Approved
4.10 gears
Rear axle fully rebuilt with new seals and detroit tru trac and new gears about 2 years ago
New air lift bags from firestone installed 6 months ago
1.5 rear block lift, 3 inch body, front 1.5 crank
Black paint was severly damaged when bought so its been bedlined with rustoleum bedliner for easy touch up and coverage... satin black color
bed has been bedlined with rustolem and has plastic liner
LED headlights and Taillights
10 inch sub with kenwood head unit with upgraded rear pillar speakers
interior in great shape/ gray with some slight cracks in dash
good neck/ 5th wheel brackets
new class V hitch
new valve cover gaskets and refinsihed valve covers
has some oil leaks from oil pan and slight leak from front diff
all new front suspension in last 4 months: all control arms bushings, TRE's, Steering braces from cognito, idler arm, pitman arm, upper custom control arms, ball joints... need an alignment (firestone lifetime) as my new upper adjustable arms are slightly too long (dont want to crank anymore) so I was going to shorten shank on joints but ordered 4 Metal Cloak joints to install and shorten if needed
all steering essentially new except was going to replace box with red head unit... power steering pump seems OK but steering box has some play (looks OEM)
New alternator replaced by previous owner
New fuel pump replaced by previous owner
4 new tires 315/75/16 and 4 new wheels
spare tire bfg in same size
new energy susp. tranny mount/ motor mounts in box need to be installed
New accel distributor, coil, ceramic plug wires and iridium plugs... last thing to do was to install new 4 hole bosch injectors but never got around to it
New-ish ranch rear shocks and skyjacker front shocks
4x4 works great
And more...
Please txt: 4 zero 4 - two 2 6 - 3 0 two 1
Last edited:
