lift

  1. PewterOBS8

    PIC REQUEST - 6 inch lift w/ 33s or 6 inch lift w/ 35s

    I bought a 1998 k1500 a few months back, and i’ve been wanting to lift it and put an old school wheel and tire setup on it(15x12.50 or 14.50). I’m wondering what it would look like if I were to put a 6 inch w 33s or 35s. Right now it’s stock with 265/75/16s and 3.73s. Only reason I ask for both...
  2. J

    Sway bar??? Pro comp 6 inch lift

    I just got a 1999 k2500 with a 6 inch pro comp lift up front and a 4 in the back. I noticed the sway bar wasn’t connected at all when I bought it, and it was UPSIDE DOWN! I put it right side up and got the BDS 6 inch end link kit and they aren’t even close to fitting. Can anyone help? What end...
  3. WannaBe1Ton

    1991 K2500HD small Lift

    Just looking for some input on my plans before I do them. My truck is a 1991 8 Lug K2500. Its used for everything. Daily driver, towing car trailers, plowing snow, hauling scrap, road trips, and everything in between. I want more height out of it. I work at a Chevy dealer and all the new 2500s...
  4. U

    Lift questions? Any ideas.

    Ok, I’m getting a lift on my 1990 single cab step side z71. Right now it’s on stock tire size, stock height. The old owner put Monroe shocks on it. It rides like a brick. Hit washboards at anything other than an idle and i swear I go airborn in the seat. My old man’s Toyota tundra is a 2012...
  5. K

    Need help identifying lift kit

    Can't find any manufacturer id's anywhere on my cousins 98 k1500 and it's not one I recognize. Front end went out and trying to order parts but don't want to order wrong tie rod ends. Any help is appreciated.
  6. U

    Good wheel offset?

    I have a 1990 regular cab step side k1500. In the next couple months im going to lift it and do wheels and tires. I’ll be about 2-2.5 inch lift front and back. I want to do 33s and a chrome pro comp or American racing wheel, probably 16 inches. With some 285/75/r16 (comes in at about...
  7. 2doortahoetoby

    Installing 3 Inch Diff Drop

    I recently took my Tahoe to an alignment shop and I was told it was lifted in correctly. I do have my keys cranked quite a bit to clear my wheels, and I have bigger CVs to handle the angle and forged RC 2-3 inch upper control arms (only works on 2-3 inch lift kits), but my lowers and tie rods...
  8. J

    Fitment with 265/65/18 on stock suspension???

    I am looking at newer gen 6 lugs for my 91' and was wondering if this size would be too large.
  9. D

    Lift kits

    Does anyone out there know a company that makes 4" lift kits for k2500?! I have a 2000 gmc k2500 crew cab and am looking fir a 4" lift?
  10. speedracre

    Stock Shocks with 2.5 front torson lift?

    I plan to lift the front of my 93 k1500 , 2.5 inches to level the truck out, can I use stock shocks with this lift or is there a longer shock or shock extender? TIA Patrick
  11. Jordan Eckert

    The overdone question of lifting a 2wd

    I have a 2000 ccsb c2500 and was looking at doing a spindle lift with 2” spacer and 3”. Body lift just looking to see if it’s doable. Already looking at the upper control arms from airbagit.com
  12. K

    Difference Between RCX 4" and 6" kits

    Hi All, I'm new here, and I know there are a million different threads about the RCX 4" and 6" lifts. I am thinking about ordering one for my 1990 K1500, and I have read that the ONLY difference between them is that the 6" comes with rear AAL. I only plan on putting 4 inches of lift on the...
  13. Brantly

    Reversing a Body Lift

    So i have a 3" body lift not sure what brand on the old 98 k1500. Was installed years ago by a shop so i'm not sure what was done, i'm wanting to upgrade to a 6" suspension lift and run 35"s. I want to take the bl off though because i feel it'll will look a little too high with the 6" lift and...
  14. Eliot Rotering

    Newer style control arms

    I have an 88 c2500 with a 4" RC lift and need to pretty much replace most of the suspension parts. Anyway, I was wondering if you could put newer style control arms from an nbs or nnbs truck. Both upper and lower of course. I found some from ksp that are made for 2011-18 trucks with a 2-4" lift...
  15. T

    Lift for K3500 dually

    Hello everyone I am brand new here and I am looking to lift my 94 K3500 dually and I’m having a hard time trying to find a lift kit for it. I am trying to go between 4-6” and trying to run 35s on the truck. Any recommendations would be greatly appreciated and anyone who has done this any...
  16. matad311

    Lifted 2WD's w/ 4" lift and a 2 piece Drive shaft - Need Help

    So I need some help, I have been dealing with a ton of rear drive line issues. Could someone let me know what there drive line angles are for the 2 piece driveshaft? Like from the transmission to the pinion and axle housing. Reason I ask is becasue I rebuilt my entire rear suspension, new...
  17. Dhash

    2WD Lift

  18. lostonabackroad

    1995 Chevy C1500 Leveling

    I've had my OBS for almost a year now and I've just got around to having the money to customize it and really make it "mine". So I was wondering if there's any recommendations on what leveling kit to put on it basically I just want the front end to be level or a little higher than the rear end...

Latest posts

Members online

Total: 2,711 (members: 44, guests: 2,667)

Forum statistics

Threads
77,810
Messages
1,640,257
Members
80,492
Latest member
subven69
Top