Search results

  1. flyboy1294

    Writeup: Installing 5.7 TBI headers on 5.7 Vortec

    The closer to the collector the quicker, and more accurate your readings are going to be, but you could weld it on the exhaust pipe if you so chose. I would not go more than an inch or two though.
  2. flyboy1294

    My 1998 K1500

    I got the TYC headlights from Amazon.com. Just make sure you are looking at the genuine TYC units, and not cheap knock offs. I have TYC headlights on a few other cars I have bought since then, and I am very pleased with the quality. The wheels are 17x9 Dick Cepek DC2s wrapped in Nitto Terria...
  3. flyboy1294

    My 1998 K1500

    Billet insert actually! Only cost me $40 if I remember right. I was very impressed with the way it held up.
  4. flyboy1294

    My 1998 K1500

    No sir, torsion bars aren't even cranked. Stock height for a 4x4.
  5. flyboy1294

    My 1998 K1500

    Thanks! I went ahead and replied, but yes the box is very big. But it doesn't stick out from under the seat too much. I liked it over all.
  6. flyboy1294

    My 1998 K1500

    Hey man, sorry for the slow reply! Life has been tough on me lately so I haven't been on here much. I'm running 265/70 R17 for tires. They sit up about 31 inches. They are as big as I can fit without cranking it up or having it rub. The backspacing on the rims is -12mm if I remember correctly...
  7. flyboy1294

    flyboy1294

    Pleasure to do business with you, sir.
  8. flyboy1294

    What the heck? One subwoofer is louder than 2?

    Everything said so far makes sense, and I tend to think everyone is right. I have noticed the amp getting hotter. Before it would just be warm after cranking high volume for hours. Now it gets uncomfortable to the touch. Probably not a good sign. Even though it is a 5 channel amp, the sub...
  9. flyboy1294

    What the heck? One subwoofer is louder than 2?

    Hey guys, here is my situation: I have a Boston Acoustics GTA-1105 amp (http://www.crutchfield.com/p_065GTA1105/Boston-Acoustics-GTA-1105.html?tp=35808). It is suppose to be able to put out 400RMS at 2ohms on 1 channel. My old setup was a Kicker CVR10 with 4 ohm dual voice coils wired in...
  10. flyboy1294

    Show me some Spring Pictures!

    :hmm:
  11. flyboy1294

    My 1998 K1500

    Time for more whoring.
  12. flyboy1294

    My 1998 K1500

    Man I've gotten lazy with this thread. Let's bring it back. I finished the sound system a while ago. Here are pics: Amp rack cut out: Rack carpeted: Amp mounted on rack: H/U in. Mmmm blue. Sub box in: Amp rack installed: I hooked up blue LED's to my amp to hit when the sub hits...
  13. flyboy1294

    My 1998 K1500

    Thanks guys! Yeah these wheels have become insanely popular since I got them. There are a few sets around town, I still think they look great though. Imo, go with black. The only problems black has is it shows dirt a lot, and it shows paint chips a lot. This color green is dark enough to...
  14. flyboy1294

    All around budget sound setup

    Sorry it took me a while to reply. 14 hour days are brutal. Make it $60 and we have a deal!
  15. flyboy1294

    All around budget sound setup

    Good! I'm glad its being put to good use. Back when I used to be more into the hobby those Axial engines were pretty torquey iirc. And thanks for checking on the box. They are so cheap that I don't expect to make any money, but I like knowing that it is being used my someone else. I can't...
  16. flyboy1294

    Why so many 400s leaving?

    Mine was the first vehicle I ever purchased with my own money. Granted, when I first turned 16 I got to drive my dad's new Durango, which was a blast. But still, I bought this one with my own money from my dad 2 years later. He bought this truck new in '98 with 7 miles on it. I literally can...
  17. flyboy1294

    All around budget sound setup

    For both? or the sub? lol I wouldn't mind hooking you up man. Did that nitro engine you got awhile back work good for you btw?
  18. flyboy1294

    All around budget sound setup

    Alright! Truck is ready for a bigger system. For future reference, the stud isn't a big deal to get out. It is actually threaded and has a nut welded to the underside of the body of the truck. The nut is exposed to the elements so it can be rusty, but just crawl underneath and shoot some PB...
  19. flyboy1294

    All around budget sound setup

    I don't have anything at the moment, but I think I'm going to purchase a nice toolbox to put my jack in. I think I'm going to run the 2nd battery in the stock location first and dedicate that battery to the system while the other belongs to the truck, as we discussed a few months ago. That way...
  20. flyboy1294

    All around budget sound setup

    Well its the warmer months and I have the itch again. I 'think' I'm going to sell my single sub box and my DVC 4ohm CVR10 sub. Also got a little Kicker amp I'm going to sell. Then from there I will get a dual 10" downfiring box and 2 CVR 10s with 2 ohm DVCs which I'll wire up to run up at 2ohms...
  21. flyboy1294

    Kicker ZX 250.2 amp for sale.

    Hey guys, I have a Kicker ZX250.2 amp. It works great and could power a small system with ease. It has 2 channels that are bridgeable. It runs 2 channels @ 2ohms with 125 RMS each, or 1 channel bridged @ 4ohms with 250 RMS. Also has lots of cool features like bass boost, cross over adjustment...
  22. flyboy1294

    P0452 OBD2 code?

    I figured as much. Where should I start looking?
  23. flyboy1294

    P0452 OBD2 code?

    Well, it is the same P0452 error code. Any other ideas on what could be causing it?
  24. flyboy1294

    P0452 OBD2 code?

    I am super **** about the SES light. I can't STAND that thing on. +1. Again, I like my SES light. Well I got a new gas cap. I drove it home, turned it off, then started it back up and the light went off. The bad news is it randomly came back on today. I suspect it will be the same...
  25. flyboy1294

    Do they make a thing like this for our trucks?

    Using the stick sills would be easier to work with and help keep cost down too I bet

Latest posts

Staff online

Members online

Total: 991 (members: 16, guests: 975)

Forum statistics

Threads
64,476
Messages
1,394,737
Members
51,755
Latest member
GriffisClnCo

Share this page

Top