Search results

  1. L

    Turn signal switch replacement

    Yea that is the switch. I was wondering if i do use that switch can I run a separate button for cruise control?
  2. L

    Turn signal switch replacement

    The flasher button on my 95 gmc sierra broke the other day. I picked up a steering column with a turn signal switch in it. The one in my truck has cruise control but the one i picked up does not. Is it possible to remove the flasher button and replace it with the one on my truck? or is it...
  3. L

    1995 GMC EX CAB ISSUE

    it was the ignition switch! thanks guys!
  4. L

    1995 GMC EX CAB ISSUE

    Fuses are all fine, check my obd1 codes and I got the following... 66-A/C pressure sensor circuit error(low pressure indicated) 67-A/C pressure sensor circuit error 81-Transmission 2-3 error 82-3X Crankshaft position sensor circuit error 83-TCC Solenoid circuit error Any help would be great!
  5. L

    1995 GMC EX CAB ISSUE

    My 95 Gmc Sierra Ex Cab K1500 is having an issue. This morning when I went to start my truck both my tach and speedometer did not move. Also my gear select indicator would not light up. To make matters worse the truck was shifting hard almost like it was stuck in 3rd gear. Any ideas what could...
  6. L

    95 gmc obd1 code 13

    greatly appreciated!
  7. L

    95 gmc obd1 code 13

    Ok thank you! Do you know where the 02 sensor plug runs? I am not sure if the guy before me cut it off or what but I can't find it anywhere!
  8. L

    95 gmc obd1 code 13

    Heres some pictures of my truck. Both manifolds have that kind plug in it. The other 3 pictures are of the passenger side where the two pipes from the manifolds meet. There is a plug there as well. Not sure if this is any help but I figured it couldn't hurt. Thanks again for any help!
  9. L

    95 gmc obd1 code 13

    Do you know where the plug for that sensor runs to then?
  10. L

    95 gmc obd1 code 13

    I have a single Blue wire that runs under the booster down to the exhaust that has been cut and capped. my exhaust goes down and meets on the passenger side(where the 2 pipes y together) and the 02 sensor is right before the cat. Would that blue wire be for my 02 sensor?
  11. L

    95 gmc obd1 code 13

    ok thanks!
  12. L

    95 gmc obd1 code 13

    how many wires should be going to my 02 sensor then? and any clue what colors? Thanks for any help!
  13. L

    95 gmc obd1 code 13

    weird, I have a blue wire that is clipped and capped off. Ill check to see if I can find a purple wire. Thanks!
  14. L

    95 gmc obd1 code 13

    After looking closely It seems like my truck does not have any o2 sensors. It appears that each manifold has plugs in it, and right before the cat there is a plug in the exhaust where the 02 sensor would go. It seems like there is no emission system on my truck. Is it possible to even pass...
  15. L

    95 gmc obd1 code 13

    Hello, I have a 95 gmc ext cab k1500 with a 5.7l 350. My check engine light will come on after driving(usually around 10-20 mins) and sometimes will shut back off. The code is reading as 13 Oxygen sensor circuit open or no activity. Where is the o2 sensor(s) located? and does this usually mean...
  16. L

    95 gmc sway bar link

    I was just doing some work on my truck and noticed my sway bar link on my drivers side was broken... So I went and picked up a pair of sway bar links(easy enough or so i though) and decide i would throw them right on. Well I for the life of me can not line these suckers up. Any tips or advice...
  17. L

    rim gets hot

    thanks!
  18. L

    rim gets hot

    Is it possible to "unstick" it or do I need to replace it?
  19. L

    rim gets hot

    yes, almost a rubber smell
  20. L

    rim gets hot

    I have been working on my 95 gmc pickup and after taking it for a quick spin I notice that the LF rim is hot to the touch, but no other rims are. Any clue what might be causing this? Any help you be appreciated. thanks!
  21. L

    Flash button issue... 95 gmc k1500 ext cab

    Ok thanks everyone! i just wasn't sure if the flashers had there own switch or not. Ill jump into it this weekend. thanks again!
  22. L

    exhaust manifolds to headers

    well it looks like my manifolds already have all the plugs in it. I am gonna with shortys as well. And I am gonna replace the entire exhaust back at some point. Thanks for all the help guys!
  23. L

    exhaust manifolds to headers

    So would i be better off getting long tube headers for performance gain? and caping off my egr wouldn't effect emissions? If i went with the long tube headers what other exhaust work would need to be done? Thanks for all your guys help so far!
  24. L

    exhaust manifolds to headers

    Thanks guys, One more question. Would I want the smog headers? or would I be fine with just normal shorty headers? thanks!
  25. L

    Flash button issue... 95 gmc k1500 ext cab

    I recent had a key made for my truck(It didn't have one when i bought it) and when the guy was making the key he broke my flasher button off... now my truck has the flasher on all the time. Is this a switch I can replace? or is this something I have to put back together? Any help would be...

Latest posts

Staff online

Members online

Total: 796 (members: 31, guests: 765)

Forum statistics

Threads
64,743
Messages
1,399,759
Members
52,348
Latest member
chuck12

Share this page

Top