Search results

  1. C

    95' RC Z71 LQ9 project.

    You'll be sorry for not going with the 80e. Hands down best investment, i punish the hell out of it and it shifts like a caddy and firm when your own it. 4l60e should have never been in a truck let alone a car with decent power and tires. I did my lq9 swap because i wanted the 4l80e.
  2. C

    LQ4 Swap in my 95 Crew Cab

    I used the 454 radiator in my swap. It is way bigger in length and it is also wider. It fits good. I trimmed some of the radiator support to give it more air. If your interested I've got a picture or two of it in my truck
  3. C

    92 k1500 lq4 Swap

    I don't know, haven't triEd them. But I imagine they would have to be modified mainly for clearance of the front drive shaft
  4. C

    92 k1500 lq4 Swap

    they are schoenfeld headers that were modified
  5. C

    92 k1500 lq4 Swap

    oh and that last 3 bolt flange in the last picture was made with 1/4" steel and a plasma cutter and tons of grinding with the die grinder all because i forgot to order one... although im not sure they even make 3 bolt flanges for 4inch pipe
  6. C

    92 k1500 lq4 Swap

    Exhaust is Finished well ive put on about 1500 miles on the new set up, about 1000 of them were with shitty exhaust set up that wouldnt allow me to run my front driveshaft. So, i built my exhaust with my bro at his house. turned out killer, and was able to squeeze in long tubes (with some...
  7. C

    92 k1500 lq4 Swap

    Well. Its been awhile since my last post but its up and running. Runs good, no hesitation, snappy, much more power and isnt bad on gas. Ive got all my gauges working correctly besides my tach. Ive got the tach to work but its reading low, at idle its around 100 or 200 on the tach. Right now im...
  8. C

    6.0/4l80e into 97 k1500 questions

    Right on Thanks for letting me know about the headers, i have a 6" lift so hopefully they will work out for me. I used Dirty Dingo Motor mounts and i had the crossmember line up. I used a large "supercooler" radiator from a 454 burb and used the stock radiator hoses from my 2004 donor. Power...
  9. C

    6.0/4l80e into 97 k1500 questions

    Let us know if those long tubes fit. ive been contemplating on buying them, though ive heard there might be some clearance issues with 4wd trucks.
  10. C

    started polishing my wheels...

    Try finding a local polishing shop. I found one out by where i live and they hooked me up with some badass polishing wheels, one for cutting and the other for fine finish, as well as the compounds to use. I made a long arbor to get into the wheels without the tool hitting the wheel. You can use...
  11. C

    Spinning Back THE DIAL

    haha.. maybe... No im just kidding, the truck is starting a new life, 6 liter and 4l80e. But seriously, does anyone know a fool proof way of doing this?
  12. C

    2004 Chevy 2500 hd transfer case

    What state do you live in? Where is the leak coming from? Ive had to replace the rear seal on the case a few times.
  13. C

    cb antenna

    wilsons are good, firestiks are good too. a kicker is what u want, then u can hear and send for miles!
  14. C

    92 k1500 lq4 Swap

    Im not sure yet, they are supposed to get back to me this week to let me know the details, im going to daily drive the truck so im not sure about going forged. Id love to but costs add up fast. It's definitely hard to not do it all while its out and all that. I know for sure its going to be new...
  15. C

    92 k1500 lq4 Swap

    Damn, nice set up you got. I would love to have that whipple, had one for a tbi but figured ill be throwing money down the drain trying to get ls power. I didnt get a good view of your steam line, what i did was use the heater return port on the radiator, it works but i dont like having to...
  16. C

    Spinning Back THE DIAL

    Thanks for the input, the thread is kind of vague on how to spin the numbers, do you go clockwise and spin it over to 0? or backwards to 0? When i tried to spin back mine i held the pins and put a drill to the bar that goes across and tried winding it over to 0000000 but somehow the pin clicked...
  17. C

    Spinning Back THE DIAL

    I just swapped a new motor and transmission and I wanted to fix the odometer bc my odometer was not working so i tried spinning it back but it didnt work as planned, i ended up busting it, so i bought a gauge cluster from a junkyard and i want to set it to 0. its a 1992 k1500. If anyone has...
  18. C

    92 k1500 lq4 Swap

    I paid 1500 bucks for the motor, trans, transfer case, exhaust, computer, wiring, intake, hoses, driveshafts, pretty much anything i thought i needed. I ended up rebuilding the top end and dumped about 600 bucks into it. then sold the transfer case because i didnt need it for 550. So.. i got a...
  19. C

    thermal actuator

    Ive had trouble with mine as well, havent hunted down the problem yet, ill give an update when i do.
  20. C

    2004 Chevy 2500 hd transfer case

    Sorry but i was in luck and someone was looking for exactly what i had, sold for 550. Thanks though.
  21. C

    92 k1500 lq4 Swap

    Well, ive got a lot done since i last posted. Ive got all the main things done, Ill have to post up some pictures when i get a chance. few questions.. Can i run my stock overflow bottle or does it have to be from a new truck? Any one run long tubes with a swap like this that has 4wd? Since i got...
  22. C

    2004 Chevy 2500 hd transfer case

    Ive got a transfer case from a 2004 chevy 2500 that had the 4l80e. I believe its a np263 or something like that. its made out of a magnesium alloy. Just curious... what do these things go for used?
  23. C

    92 k1500 lq4 Swap

    Hows it going thought i would share some info and pictures. I pulled a lq4 6.0L from a 2004 gmc Sierra with a 4l80e. Its Drive by wire. So far ive been gathering parts and cleaning some stuff up. Got motor out of the truck thats getting the 6.0 and waiting on my mounts and other goodies. my...

Latest posts

Members online

Total: 1,056 (members: 21, guests: 1,035)

Forum statistics

Threads
64,414
Messages
1,393,470
Members
51,600
Latest member
94sierrak1500

Share this page

Top