Search results

  1. Sethterry1696

    Hesitation under load

    I am gonna replace the coolant temp sensor for the computer cause it's cheap and easy and if that don't fix it I will look into getting a scan tool
  2. Sethterry1696

    Hesitation under load

    Well what scan tool do I use
  3. Sethterry1696

    Hesitation under load

    I used a jumper wire on the obd1 port and only the diagnostic code flashed
  4. Sethterry1696

    Hesitation under load

    I have a 94 silverado with a 350 motor has around 60k on it. Truck runs great other than if you really get into second gear bogs really bad around 2500rpm once it clears up it pulls good. Also has a very intermediate miss at idle and has a very rich smell. Any help would be appreciated
  5. Sethterry1696

    Power draw

    Man this forum is full of people who just talk a bunch of crap on every little thing. Thanks to the people that actually suggests something not just be a idot like all these others....
  6. Sethterry1696

    Power draw

    I hope I found the problem the cargo lamp never worked and the wording on the switch was worn off so the lamp was left on I unhooked the switch and did a parasitic draw test and it was all normal I should have tested it then pulled the plug but let you all know if it solved the issue in a day or 2
  7. Sethterry1696

    Power draw

    I have a 93 k2500 with a 350 when I bought the truck the guy had a battery shut off because it would kill the battery over night I installed a brand new optima red top and removed the remote start that quit working it still will drain the battery over night or 2 nights any idea what could cause...
  8. Sethterry1696

    Rough acceleration

    I just used a paper clip and jumped the terminals on the obd1 plug I don't have a scan tool for obd1
  9. Sethterry1696

    Rough acceleration

    There was no codes I checked today
  10. Sethterry1696

    Rough acceleration

    Just put a new filter on yesterday the next thing I want to check is the coolant temp sensor cause my temp gauge seems to read weird there is no cat on it I have a new pump just wanna try the easy stuff before I have to do that
  11. Sethterry1696

    Rough acceleration

    I have a 93 k2500 with a 5.7 around 60k on the motor has a slight miss at idle wich I think 90% of them do but it runs great up till it shifts into 2nd gear under a hard load then it struggles pretty hard to climb past 2k rpm I'm not expecting much but the fuel economy is terrible has to be...

Latest posts

Members online

... and 35 more.
Total: 1,932 (members: 85, guests: 1,847)

Forum statistics

Threads
64,510
Messages
1,395,547
Members
51,861
Latest member
dadlyf3

Share this page

Top