Search results

  1. B

    Replacement Radiator for a 96 k2500 hd

    5.7 with oil and tranny cooling..4l80e transmission and 410 rear end...8600 gvw
  2. B

    Replacement Radiator for a 96 k2500 hd

    My radiator Which is original the plastic tank cracked. I ordered a new Delco radiator According to the Fitment chart this is the one that I needed it's like a 21 0 3 3 Which the AC Delco is as close to the original and so I could get. I added for about a month when to put it on it found out...
  3. B

    Any screws, inserts, hardware I should get before grille/light replacement?

    I bought mine off of Amazon I bought a giant bag of them for like 7 bucks. LMC Carries the nylon inserts but they are so slow on shipping. So Amazon Ship them to me the next day.
  4. B

    14 bolt semi float brakes

    interested in the backing plstes,,I have a 96 k2500 8600gvw
  5. B

    Poor Fuel Economy With New Engine.

    I have 800 miles on my new engine, it does have a slight stumble when taking off from a stop but runs pretty well. The Original engine 5.7 was getting around 19 mpg , the new engine is around 12 mpg. I am running comp cam 480x488.1 lift Upgrade Multiport fuel spider 44lb or so 10 ,1 .compression...
  6. B

    where to get paint

    I've done pretty well by in pain off of eBay. I got 2 qt of chassie Saver with S8 reducer is reducer for 60 bucks. I got a quart of Chevy black acrylic with hardener and a quart of clear For About 60 bucks too.
  7. B

    Flowmaster- MagnaFlo Part Number

    I Found aces aces performance muffler muffler in Houston And they're installing a magniflow muffler on my truck. It's Dual 3" in the front 3" out the back I'm using my existing tailpipe as it's in good shape it's stainless from is it stainless from factory original. I was gonna put the...
  8. B

    Flowmaster- MagnaFlo Part Number

    I'm in the Spring branch area of Houston. I've had 3 tell me that they don't do performance Exhaust systems I said what are you talking about I just drove off.
  9. B

    Flowmaster- MagnaFlo Part Number

    Mayco on Gessner wants 650 to replace muffler and run dual pipes put the corners. From the muffler on back it's not much pipe and it's a pretty easy Bend and Weld no obstructions. I just really wanted the muffler cut off and in a side exit's fine with me
  10. B

    Flowmaster- MagnaFlo Part Number

    I was looking at a flowmaster Delta flow. I'm gonna leave the catalytic converters. The stock muffler is beyond huge and and very restrictive for sure. I want to get a better sound and less restriction that's my goal. The engine was reworked By G and G motors , I still gotta do PC M swap
  11. B

    Flowmaster- MagnaFlo Part Number

    Can anybody help me out with the partner part numbers for these 2 brands of mufflers for a 1996 K 2500, 8600 Gross vehicle weight. I live in a big city Houston Texas Texas bend the 5 muffler shops and they didn't know anything about mufflers it seems. I'm an old guy just looking for some...
  12. B

    Replace spare tire hoist

    I'll give him a holler
  13. B

    Replace spare tire hoist

    Thanks to everybody for all the information and comments.
  14. B

    Replace spare tire hoist

    I hope I'm in the right forum for this, I need to replace my spare tire hoist. Does anybody know if there's an aftermarket Is part that will replace this or if it's only a junkyard item? I climbed under my truck and my spare tire was gone and the cable was snapped ... Thanks for the hell
  15. B

    help with filling power steering fluid

    I had similar problem with my power steering so I pulled out my trusty turkey baster sucked out as much as I could, replaced the fluid did a couple of times. Fluid looked good. My dollar store baster came through again.
  16. B

    Doing the 0411 PCM Swap need Pin Out

    thanks we are connected.
  17. B

    Doing the 0411 PCM Swap need Pin Out

    I've got my performance engine running running in my 96 K2500, In need to Tune the PCM. I would like to get the pin out and base programming from Lextech. What is the best way to get in touch with him for the files and is there a cost associated? My 1st time and getting involved in this stuff
  18. B

    Sny have a Tunercat for sale?

    Looking for a tuner cat to either buy or use for a fee. Finally got my 96 Running was a performance engine and need to do A 0411Swap. Or with the tuner cat to my black Box. Any helper direction will be appreciated I'm an old guy not enjoying the learning curve.

Latest posts

Members online

... and 15 more.
Total: 1,635 (members: 65, guests: 1,570)

Forum statistics

Threads
64,366
Messages
1,392,378
Members
51,505
Latest member
ObsChevy26918

Share this page

Top