Search results

  1. 99caddymess

    383 injectors

    It's nothing crazy, just aluminum heads and a mild cam. I guess I'll see what the tuner has to say
  2. 99caddymess

    383 injectors

    I am about to get my (99) 383 vortec tuned. I would like to put after market injectors in it. Hopefully around 30lb/hr. I was just wondering if anybody knew where to find injectors with the spider system. I want to replace both, but haven't been able to find both in the same kit. Thank you in...
  3. 99caddymess

    383 vortec running rough

    And what do you mean by “dizzy in spec”
  4. 99caddymess

    383 vortec running rough

    Cap and rotor are the ones I got on the truck when I bought it 6 months ago. The poly lock rocker nuts are why I have to use a taller valve cover. I don’t have a fuel pressure tester or a compression tester so I wont be able to find those out. And I haven’t changed the injectors, so whatever...
  5. 99caddymess

    383 vortec running rough

    So I checked out the cam retard and it is -16.1. I tried moving the distributor and it did not change at all, even after revving it up
  6. 99caddymess

    383 vortec running rough

    I do not. I will for sure check that out.
  7. 99caddymess

    383 vortec running rough

    Sorry if this has already been discussed, but I couldn’t find anything that pertained to my situation. So I have a 99 k2500 that I put a 383 vortec in. It is running incredibly badly. It shakes the whole truck at idle. I plugged a scanner into it and it is giving me “p0401 egr flow insufficient”...
  8. 99caddymess

    Tall valve covers and AC compressor

    https://www.speedwaymotors.com/1958-86-SBC-OEM-Style-Steel-Valve-Covers-Raw,481290.html?utm_medium=CSEGoogle&utm_source=CSE&utm_campaign=CSEGOOGLE&gclid=Cj0KCQjwk7ugBhDIARIsAGuvgPbaqBIH4cZDESIdsniltmCMi7c5RNQimNVRTNOF7ZQnzgKAz4HSV8YaAswOEALw_wcB I find out these worked just fyi
  9. 99caddymess

    Tall valve covers and AC compressor

    Yes I am. They are what came with the rockers
  10. 99caddymess

    Tall valve covers and AC compressor

    The rocker stud and nut is too tall, the valve covers fit, they just have a quarter inch gap at the bottom
  11. 99caddymess

    Tall valve covers and AC compressor

    I have a 1999 k2500. I am in the process of replacing the 5.7 with a 383 (vortec) with aftermarket heads and cam. I have been able to get most issues solved, but the one I can't is one of the last. I have taller valve studs/roller rockers, so the factor valve covers will not work. I have some...
  12. 99caddymess

    Interior lights wont turn off

    I actually found out there was no bulbs in the dome lights, and that sort of fixed the problem. Now my problem is they won't turn off with the doors if the key is off
  13. 99caddymess

    Interior lights wont turn off

  14. 99caddymess

    Interior lights wont turn off

    I have also checked other forum posts about this issue and none have been quite the same. I saw one about replacing the third brake light with a cheap ebay replacement(which I did) and having this issue. It was solved by cutting the red/yellow wires. So I tried it but again it did not work.
  15. 99caddymess

    Interior lights wont turn off

    I have recently been having a problem with my 1999 gmc sierra crew cab. I can not turn the door lights or courtesy lights off. I replaced the door jamb switches, and the head light switch to no avail. I took apart both rear door switches and there was only wire on both of them so I'm guessing...
  16. 99caddymess

    Windows hitting speakers

    Apparently not. I'll figure something out though. I'm repainting it in the near future, might just use Suburban doors
  17. 99caddymess

    Windows hitting speakers

    I will definitely keep that in mind thank you very much
  18. 99caddymess

    Windows hitting speakers

    Oh me too. But also on the crew cab there is no place for speakers to go. There aren't even rear speakers from the factory
  19. 99caddymess

    Windows hitting speakers

    As shown below it is a much larger speaker. I can't really return them so I'm going to have to make it work, I'm considering a spacer but Im afraid if i do that i wont be able to get the door panel to seat properly
  20. 99caddymess

    Windows hitting speakers

    Hey all. I have a 1999 gmc ccsb that I'm in the process of putting new speakers in, front and rear. They are ds18 pro-x6.4bm. In test fitting them I found out that since the magnet is so big the window hits it when I roll them down. I was just wondering if anybody else experienced this problem...
  21. 99caddymess

    Mystery pigtail

    I think that is what it is
  22. 99caddymess

    Mystery pigtail

    That actually makes sense. It used to have power mirrors but not anymore. Thank you
  23. 99caddymess

    Mystery pigtail

  24. 99caddymess

    Mystery pigtail

    So I'm working on my 1999 gmc k2500 ccsb. I'm trying to put new speakers in it. When I took the passenger side speaker, a pigtail not connected to anything fell out. It's got tape with the number 8144 on it, and 4 wires. Tan, red, red, and purple/ white. I can't find what it was supposed to be...
  25. 99caddymess

    Fender flare holes

    Hello, I just recently picked up a SUPER clean 1999 gmc k2500 ccsb. The truck doesn't have an ounce of rust on it but it has those stupid factory fender flares. I want to take them off and the only thing keeping me from doing it is those little mounting holes that gm designed them with. I have...

Latest posts

Staff online

Members online

... and 8 more.
Total: 2,073 (members: 58, guests: 2,015)

Forum statistics

Threads
64,441
Messages
1,394,108
Members
51,680
Latest member
Cajunman78

Share this page

Top