Search results

  1. 93 K1500

    3/4 Ton Lift Springs

    When I added my 3/4 leaf pack it added 2-1/2". For those of you looking to do this keep in mind even with the 3/4 the ride is way rougher. Going down dirt roads empty you can definatly notice how much stiffer they are, on pavement not so much until you hit a bump. Also keep in mind depending on...
  2. 93 K1500

    Troubleshoot: Lost power...

    I dont know how strick your emissions are but I know that when a cat gets to hot( purple color) it can start to melt the "waffle" material inside, when its cool air still passes through when it gets hot and starts to melt it starts not letting air through. On mine it caused the truck to idle...
  3. 93 K1500

    Troubleshoot: Lost power...

    Have you checked your Cat?
  4. 93 K1500

    Mystery oil leak

    There is also a Elbow on the very back of the motor that if it hasnt ever been changed it is plastic and a very common place that these motors leak If the motor is in the truck you can only see it with a mirror
  5. 93 K1500

    How Much Can YOU Haul IN 1/2 Ton???

    Yes it lifted the rear 2", I didnt mess with the front because now when it is loaded it sits perfectly level.
  6. 93 K1500

    Smog Help

    Is there a way to check the can and or tank? Maybe the seal from the pump to the tank has worn out or shifted when I changed the pump?
  7. 93 K1500

    Smog Help

    Well Had to get the truck smogged at a test on center, passed all the emisions portions of the test but failed on the Fuel Evaporator leakdown test. Does anyone know of a good way to diagnose at home where the leak is- local shop wants 200 for just a smoke test. Thanks
  8. 93 K1500

    94 TBI 350 stalling problem

    Does it stall when its cold? or only when Hot?
  9. 93 K1500

    Will I need a ball joint press???

    Remember to cover or block the sparks from the CV boot before grinding off the tops, one spark melts thru and ur doing more than ball joints. I have a whole bunch of pics from when I did mine I will try and post em when I get off.
  10. 93 K1500

    Hesitatiom or stumble when cold?

    Hows your oil look? Have you check for vac leaks?
  11. 93 K1500

    No Fluid Pressure - No Gears Forward or Reverse- NEED HELP

    :buttkick:Final Verdict- Torque Converter was seated Properly, the tech admitted he had to pull the torque converter out about 1" to bolt it up, in doing that the "ears" from the torque converter were only in gauged half way. Snapped the ears off the Pump and destroyed everything inside. They...
  12. 93 K1500

    No Fluid Pressure - No Gears Forward or Reverse- NEED HELP

    Right But would the truck even drive if it wasnt seated all the way
  13. 93 K1500

    No Fluid Pressure - No Gears Forward or Reverse- NEED HELP

    Update- Drive line does not turn, or even ingauge (chevy Clunk from park to gear) Trans shop said something in the valve body, got stuck and fried it, they replaced the valve body under warranty - now they said there is still no fluid pressure, Thay are saying that they think the pump broke...
  14. 93 K1500

    No Fluid Pressure - No Gears Forward or Reverse- NEED HELP

    Is it very Common to snap the output Shaft- and I would guess it would grind the whole time in that case wouldnt it??? Just bouncing ideas here.
  15. 93 K1500

    No Fluid Pressure - No Gears Forward or Reverse- NEED HELP

    I was wondering if maybe they gave me a trans case from a different year- I know the 94 will only interchange with 94' -I think because the bolt pattern but I am not sure. I thought that there were a couple years where they had a shorter shaft- so maybe I didnt brake the ears just groung them...
  16. 93 K1500

    No Fluid Pressure - No Gears Forward or Reverse- NEED HELP

    No down shifting for me, I tried ALL gears including 4X4 Hi and Lo Nothing. It is like the trans is not even their until I try to put it in park. Does the input shaft move forward to ingauge? Just wondering if I broke the ears off the Torque Converter causing it to no longer line up or be able...
  17. 93 K1500

    No Fluid Pressure - No Gears Forward or Reverse- NEED HELP

    Just wondering though if the pump went out shouldnt it still hold Park???? Im no guru either
  18. 93 K1500

    No Fluid Pressure - No Gears Forward or Reverse- NEED HELP

    So I bought a rebuild trans- 4l60E -it was driving shifting perfect for small trips less than 5 mi. first time on the highway about 15 mi. running fine on the way home I pulled up to a light stop and DONE will not go into any gear wont hold park nothing. So I tow it how and now If I start the...
  19. 93 K1500

    Code 28

    Thanks I guess its time to start checkin man I hate elect. issues maybe ill get lucky and its just a bent pin. But if that is the case why does it run good for a couple min. then all hell brake loose????
  20. 93 K1500

    Code 28

    Last night I was reading that the code 28 Trans range Pressure control switch was only on 94' plus can anyone confirm this, Because I also found code 28 listed as PCM circ. # 2. ?????????
  21. 93 K1500

    Code 28

    Yes All new electronics -
  22. 93 K1500

    Swapping PCM

    Does anyone know if you can interchange a 88 C1500 PCM, with a 93 K1500 PCM??? I belive I had a 700R in the 88 and now the 93' has a 4L60E, Dont know if I am just hoping it will work. The 88 PCM only had a month worth of driving before it was pulled so it is basically brand new.
  23. 93 K1500

    Code 28

    Alright just finished replacing my tranny- 4L60 E. Started up drove fine for like five minutes then all the sudden boggs way down off the line slams into second I limp home and pulled a code 28, Can someone please help here I am at a loss. Could it also be the PCM going out ????
  24. 93 K1500

    NBS with 32" lift...and IFS

    Not to mention no good for wheelin t-bars still look like the are in the factory position:whymewhyme:
  25. 93 K1500

    Santa thought I need a rebuild for x-mas

    So tranny started shifting hard on the way home last night, this morning was very sluggish in first and second, and would not go over 40mph. Limped it home now I need some advice- I have never worked on a trans but have a mech in the family to come help. I have a few questions 1: what is the...

Latest posts

Members online

... and 26 more.
Total: 1,622 (members: 76, guests: 1,546)

Forum statistics

Threads
64,508
Messages
1,395,491
Members
51,854
Latest member
callmepacco

Share this page

Top