Search results

  1. Dakota Hill

    1997 k1500 ext cab

    traced wiring back found 3 wires not in correct pin swapped those back got all that right, now im throwing a code p3940 camshaft position problem, the cam crank position is -45 no matter what position its in nor hole, new cam crank sensor and pigtail any ideas?
  2. Dakota Hill

    1997 k1500 ext cab

    Update 3/19/24 back together and running but have no maf sensor or bank 1 o2 sensor which won't let me adjust ckc, so any guesses on where to start
  3. Dakota Hill

    1997 k1500 ext cab

    Installed double roller and it was grinding on reluxter wheel tore all down cleaning up throwing new bearings in and putting back together
  4. Dakota Hill

    1997 k1500 ext cab

    All cylinders were woth 15 psi of each other plugs looked good number 3 was lil oily before the oil so time will tell definitely looking to build it differently this time
  5. Dakota Hill

    1997 k1500 ext cab

    Here we are a 51 weeks later went to have 0411swap done, will not run without 30 degrees of timing been that way since I put it in the truck, bad news I gotta pull the engine and figure out what djit on me got oil coming out the exhaust on the drivers side and she sounds hurt only 2500 miles
  6. Dakota Hill

    Marine Intake

    I have thought about doing this for myself as well, interested on how it turns out.
  7. Dakota Hill

    1997 k1500 ext cab

    Haha iknow nothing too lol trucks up for winter here in michigan ill work on it and see how things go
  8. Dakota Hill

    1997 k1500 ext cab

    L31 that's what I'm saying my 350 should have some power and it's gutless I swear it's in the tune.
  9. Dakota Hill

    1997 k1500 ext cab

    Hell with me doing 0411 im hoping I can data log everything and find some of my issue and resolve it the best I can
  10. Dakota Hill

    1997 k1500 ext cab

    But why I did the research the 062 aren't that bad of a head granted their dated but still should be able to make some reliable power with it
  11. Dakota Hill

    1997 k1500 ext cab

    Fuel pressure is 60 psi at wot, Trucks 3.42, with 285/70/17s, auto 4l60e, no brake drag, exhaust fairly new fresh headers when I put the engine, single chamber racing mufflers, and no cat system, no collapsed pipes.
  12. Dakota Hill

    1997 k1500 ext cab

    Also now in the process of looking up all the 0411 swap info and go that route now already needs retuned so I might as well just do it
  13. Dakota Hill

    1997 k1500 ext cab

    Okay so what sparked this was its stock bottom end with flattops and it's studded with stock 062 heads with upgraded springs for the lift I was using, I upgraded the fuel injection system while I was at it and had black bear do the tune because we'll im not that experienced with it yet learning...
  14. Dakota Hill

    1997 k1500 ext cab

    Yeah its all sorts of everything right now havent done a compression test on it, put it in dot to dot, yes stock 062 heads with upgraded springs all that I did to em, turn push rod back and forth and tighten rocker till their is resistance and tighten one full turn, how I was taught hasnt failed...
  15. Dakota Hill

    Kodiak/Topkick Exterior Door Handles

    I found a website that makes them kinda pricy but well worth it their metal strong no issues with em
  16. Dakota Hill

    1997 k1500 ext cab

    Actually I need timing taken out it sits at idle 35 degrees advanced sitting at 750 ish for an idle
  17. Dakota Hill

    1997 k1500 ext cab

    Have a scanner hooked up and looks normal to me but then again I don't know what they should be to begin with prolly my fault, but im learning
  18. Dakota Hill

    I got a 1997 k1500 thinking of putting a 5.3 ls in?

    My issue is finding someone who has the knowledge to be able to answer them
  19. Dakota Hill

    I got a 1997 k1500 thinking of putting a 5.3 ls in?

    Well I built a 5.7 instead now have a gutless truck with no answers as to why sounds strong ‍♂️‍♂️
  20. Dakota Hill

    1997 k1500 ext cab

    Hey guys looking for some input so lastyear I built a 5.7 350 for my 97 used icon forged flattop pistons, stock connecting rods, stock crank, a cam from comp woth .488 .495 lift cam and shorty headers, and had it tuned by black bear and for some odd reason it just dont run right. Like itll make...
  21. Dakota Hill

    No crank, no start, stumped.

    Currently chasing the same issue on my 98 the starter relay ground is hot and ive chased it into the firewall and lose track of it dont know what the hell it is, also just recently did head gaskets
  22. Dakota Hill

    I got a 1997 k1500 thinking of putting a 5.3 ls in?

    Im koty im new to the page and i got a 5.7 350 thats just plain wore out ive been thinking of finding a donor 5.3 ls to put in the truck figured the 5.3 would make more power and run alot better what all does it take to complete the swap and how much headache is it to complete? Any help or...

Latest posts

Staff online

Members online

... and 23 more.
Total: 1,906 (members: 73, guests: 1,833)

Forum statistics

Threads
64,498
Messages
1,395,246
Members
51,825
Latest member
smit1955

Share this page

Top