Search results

  1. Tigwldr

    The new Hoe'

    Thats the evap canister or charcoal canister and the other is the EGR tube. Glad I could help :) Let me know if you need any other shots, when the rain clears I'd be glad to get you what you need.
  2. Tigwldr

    The new Hoe'

    Ok, now that my computer just pooped the bed on me mid post, I'll do this again. You are correct the evap solenoid is the one with the red connector, it also ahs a tube that goes across the top of the manifold into the evap canister. Its raining out so I wont be able to get any shots with...
  3. Tigwldr

    The new Hoe'

    Top picture = one goes to the ac fitting that is missing the other two go to the TB Bottom picture = two go into the ignition coil and heat sink(or whatever its called) and one goes into a valve on the side of the upper intake manifold that appears to be missing. The good thing about these...
  4. Tigwldr

    tubular control arm info

    Wow, talk about inexpensive. Thats a great price for them. My only concern would be that they are made of plate. I think they are 1/2" uppers and 3/4" lowers, which is thick but, when you consider the wieght of the vehicle, makes me a little hesitant. How many other companies make them? Thanks
  5. Tigwldr

    tubular control arm info

    How many companies make them? Are the ones made for pickups compatible to my front end? Thanks
  6. Tigwldr

    tubular control arm info

    Just curious. What are the benefits of using tubular control arms? I realize they are stronger but what are the other benfits? How many options do I have? Thanks
  7. Tigwldr

    static drop pics

    Thanks man, I appreciate it.
  8. Tigwldr

    static drop pics

    Finally put the spindles on. Needs a good cleaning.
  9. Tigwldr

    static drop pics

    Very nice, looks great. Bearcat, I agree 100%
  10. Tigwldr

    rear seal/bushing info

    I ended up give FLT a call. They are sending me a new tail housing. I'm going to be doing it myself, since we have moved, I'm not too familiar with any shops around. Now all I need is the yoke from the driveshaft that goes into the tranny. Thanks for the help rhino
  11. Tigwldr

    static drop pics

    Awesome, Thanks man, I appreciate it.
  12. Tigwldr

    Exhaust advice

    I have Thorley Tri-Ys maggy HF cats and all 2.5" into a di/do maggy 12568 muffler I merged them out of the muffler to clear over the axle. I think its 3" over the axle and dumped without a tail pipe. Its deep all the time. You need to replace all the factory tubing with atleast 2.5" tubing...
  13. Tigwldr

    rear seal/bushing info

    Yes, geez, I'm slow today. I forgot I dont have a sig here.
  14. Tigwldr

    rear seal/bushing info

    Sorry, its for my 99 Tahoe. I would prefer to buy the new housing. Would that come with a bushing and seal? I think I would like to buy the peice that slips into the tranny to, yoke? Mine has some rust and corrosion on it, the culprit to this unfortunate incident, hah. Do you have a part...
  15. Tigwldr

    static drop pics

    I love your truck. Do you have any recent shots of it? All I see is xxxxxxx, hah. Also, what kind of modifications were done to your arms? It would be good to know, I'm getting ready to put my BT 2" drop spindles on in the next week or two. I'd love a set of those Vette wheels on my Tahoe...
  16. Tigwldr

    rear seal/bushing info

    Has anyone installed a new bushing in the tailshaft of a 4L60E? The end where the driveshaft slides in. After installing my flip, the driveshaft had gone further into the tranny, unfortunately I was not paying attention to the end of the yoke that goes into the tranny and it had a little...
  17. Tigwldr

    The Stupid Lowered Questions Thread

    Thanks again C, I appreciate your help. Now all I need is more time in a day, hah.
  18. Tigwldr

    The Stupid Lowered Questions Thread

    Gatcha, so if I were looking at wheels with say a 5" back spacing I would have to bump that up to 5.5" for that extra half inch that the spindles pushes it out? They are BT spindles, I dont think I'd sell them to buy another brand, I already have them. Thank you
  19. Tigwldr

    The Stupid Lowered Questions Thread

    Cool, thanks ccreddell. I do plan on going with a larger wheel some time in the future. Probably 20s no bigger. How will this effect anything, if it does? Thanks again
  20. Tigwldr

    The Stupid Lowered Questions Thread

    Sorry, I did replace my stock bump stops with short ones form Hotchkis. If anything I can cut them down. Cool, I'm going to roll them. Thanks man, I apreciate the help and info..
  21. Tigwldr

    trimmed lca

    Thanks for the info guys, I appreciate it. This is going to be my next project. I will probably skip the reinforcements, it doesnt seem to be necessary. Thanks again
  22. Tigwldr

    The Stupid Lowered Questions Thread

    Heres one thats been asked a thousand times. I'm getting ready to put my spindles back on (its been a couple of years, I dont remember). I know I have to shave down the gutters on my lowers but, is there anything else I need to do to make sure I have clearance for? Will my stock tires work...
  23. Tigwldr

    trimmed lca

    Random question: Has anyone reinforced there arms after trimming the gutters?
  24. Tigwldr

    Intake Gasket Replacement

    This is a great a write up. I'm about to do my third, yay. What is a good amount of rtv to use? What is the best rtv to use for a lower intake manifold gasket?
  25. Tigwldr

    GMT400s gone wild..! Topless..!

    I like it. Definately different.

Latest posts

Staff online

Members online

... and 18 more.
Total: 1,810 (members: 68, guests: 1,742)

Forum statistics

Threads
64,723
Messages
1,399,450
Members
52,301
Latest member
chevyguy1005

Share this page

Top