Search results
-
97 ECSB W/ 3rd Door Ongoing Build
Got the Flex-A-Lite fans put in this past weekend. Had to fab some temporary brackets until I can work out a more permanet solution. Have to say they work fantastic and cool way quicker than I was expecting them too. Check engine light is finally off and not throwing any more codes, going to...- JB97
- Post #5
- Forum: Street Build Threads
-
97 ECSB W/ 3rd Door Ongoing Build
Well been a long 2 years and haven't gotten as much done on my truck as I have wanted to. Step Dad passed away summer before last so it was a year before I touched her after he passed(was what we did together). Had a house built last summer and had to sink a ton of money into that so that...- JB97
- Post #4
- Forum: Street Build Threads
-
How bad are clearance problems with a 5/7 drop?
Do You still have your front sway bar on? That's the only thing I seem to get rub on with on my 5/7 with 20's, at work and can't remember the tire size but I was debating on just taking it off. Just not sure how the ride will be without it, planning on bags eventually but that's down the road still.- JB97
- Post #37
- Forum: Lowered and Bagged Suspension
-
97 ECSB W/ 3rd Door Ongoing Build
- JB97
- Post #3
- Forum: Street Build Threads
-
Smoothing Out The Roll Pan
So for Fathers Day weekend I got to work on my truck. Was time well spent and decided while I'm waiting on parts I would weld the rear rollpan and smooth over the seam between the rollpan and the bed corners. While I was doing that I smoothed over the dent that was in the rear of the bed and...- JB97
- Thread
- Replies: 1
- Forum: Paint / Body / Detailing
-
Plastidip?
Make sure you do a few layers if your going to plasti dip, take a look at my build thread and see how much of a pain it is to remove if you dont.- JB97
- Post #35
- Forum: Paint / Body / Detailing
-
97 ECSB W/ 3rd Door Ongoing Build
Got the new wheels put on.- JB97
- Post #2
- Forum: Street Build Threads
-
97 ECSB W/ 3rd Door Ongoing Build
Figured it was time to make my build thread so I can keep track of everything as I go. Havent done much the past two weeks and will be taking a break for a bit so I don't get burnt out spending every weekend I have free working on my girl. The wife wants quality time to and can't have her get...- JB97
- Thread
- Replies: 4
- Forum: Street Build Threads
-
Shaved My 97 ECSB
Could probably use door poppers to pop it open but would need 2, one for each side of the tailgate and they would have to be hefty solenoids.- JB97
- Post #4
- Forum: Paint / Body / Detailing
-
Shaved My 97 ECSB
Started out the weekend right, got my tailgate handle relocated to the inside of the tailgate and shaved the outside. Still has a little light grit sanding in a few spots but the majority of it is done, figured I might as well get all the dings fixed while I had it off too. Going to finish that...- JB97
- Thread
- Replies: 4
- Forum: Paint / Body / Detailing
-
Scott's 94 Sierra
Looking really good man, looking from where you started to where it is now gives me so much hope for mine.- JB97
- Post #54
- Forum: Member Trucks
-
Need Anti Sway Bar Help
Yep already got them, cheaper at Summit after the shipping. Will be putting it on this weekend, as well as shaving the tailgate and the doors. Going to be a good weekend.- JB97
- Post #18
- Forum: Lowered and Bagged Suspension
-
Daily truck pics
Step Dad's 87 R10 with a rebuilt 454 big block- JB97
- Post #918
- Forum: Car / Truck Photos and Videos
-
Need Anti Sway Bar Help
Will keep that in mind Sewlow, right now just trying to get the side to side sway that I am getting. Need to get it to where it can pass inspection and then I may have to look into adding one in the rear. I like the thought of having more control, not that I will be driving fast for any...- JB97
- Post #12
- Forum: Lowered and Bagged Suspension
-
Need Anti Sway Bar Help
I will have to look to see if I can get the end links, everything was already installed when I bought the truck so I am finding things now that need to be taken care of. Thanks for all the help you saved me a good chunk of change to use somewhere else on it.- JB97
- Post #6
- Forum: Lowered and Bagged Suspension
-
Need Anti Sway Bar Help
If a stock one will work my buddy has an extra he said he would give me. Would have to get all the hardware as it is just the bar, I have DJM upper and lower control arms on the front would that cause any issues with placement that you know of.- JB97
- Post #4
- Forum: Lowered and Bagged Suspension
-
Need Anti Sway Bar Help
Need some help with what sway bar to go with. I was looking at some from Hellwig but they only go as low as a 4" drop for the front. Need one for a 5", was driving the truck a bit yesterday since I got the new radiator put in and noticed it had tons of side sway. Crawl under the front and behold...- JB97
- Thread
- Replies: 17
- Forum: Lowered and Bagged Suspension
-
My other GMT400 with new 5/6 drop...
Nice looking truck JWall- JB97
- Post #7
- Forum: Lowered and Bagged Suspension
-
Finally Got My Project
Yea, I watched tons of videos on how to remove it but it was 1 thin layer. From what I researched to pull it off like that it has to be applied at a minimum of 3 layers.- JB97
- Post #6
- Forum: Introduction
-
Finally Got My Project
Hey all, glad to be here. Finally got my project truck, been a long time coming. I have been visiting for about the past two weeks reading old threads and figuring out my game plan. I picked up a sweet 97 extended cab with a 5.7 3 weeks ago at a steal and have already started putting things in...- JB97
- Thread
- Replies: 6
- Forum: Introduction
Staff online
-
kennythewelderOfficially Retired, B31-3 (6-G) certified welder. -
df2x44L60E Destroyer