Search results

  1. dryslk

    Drilled/slotted or smooth rotors?

    If U R concerned with Rotor Life & Durability Welcome 2 the World of CRYO Treatment its good enough that City of New York uses it on their vehicles 4 longer Life & Xtened wear p.s. its Racing's best known Secret
  2. dryslk

    TOTM questions and coments thread

    CHEEP WAY 2 BUILD A STROKER 5.0 vortec using GM parts ???
  3. dryslk

    Very little HVAC airflow - SOMETIMES

    FYI there is a RESET HVAC Controller Program on You Tube Try this sometimes when working on my Truck if the Batt goes 2 low the HVAC/ Heat Controller gets Confused doing the Reset Cures the Prob hope this helps Best of the New Year Everyone from the Great Frozen Canuckistan Temp Now is -...
  4. dryslk

    Gear Oil 80-90w or 75-90w?

    Just changed my Diff Oil 2 80/90- with MOLY-Slip @ 185000 Miles & I live in Winterpeg Manisnowba
  5. dryslk

    The Stupid Engine Questions Thread

    so here's a question I want to build a 327 - 331 Stroker Vortec with stock + existing parts from my 1997 5.0 Vortec except the block. I dont need Hi Hp but I would like #325 + Ft Lb of Torque any good ideas ??? /// Just Thinkin
  6. dryslk

    Winter Grille Cover

    I use a Piece of Rubber Back Carpet Tie Wrapped 2 grill .Fyi when you cover your grill you still have 30% air flow on the bottom of the rad where i live it can get down to -25 f with the wind up to -50 sometimes its Colder here than at the NORTH POLE Winterpeg Manisnowba is home
  7. dryslk

    1993 C1500 ride height question

    Check UR Overall Tire Diameter in relation 2 stock tire diameter Ill bet U find about 1.5 /2 inch taller tire with Ur Current Tires Just a thought C if U can find a pair of stock wheels with stock tires mount them on the truck & Measure ride height . There R tire calculator programs that will...
  8. dryslk

    Any secrets for a bumping MPG on 1998 305?

    OK so how do I Program this into my 1998 c15005.0
  9. dryslk

    Calipers & Rotors from Caddy SLS 2 my 1998 c1500 + Circle Track Brake Stuff

    Wonderin if I can use Calipers & Rotors from a 2003 Caddy Sls F& R on my GMT 400 Calipers R , 2 piston F & Single R with the Master Cyl upgrade 2 Nbs Should make a Pretty nice System FYI if U are looking 4 Brake Residual Brake Pressure Valve as well as F -R Bias Adjust Check out the Circle...
  10. dryslk

    Head gasket repair or crate motor

    Have U Checked 2 see if Its not a H2O Leak @ the Intake Manifold ??? :driver:
  11. dryslk

    K1500 upper control arms 2 help lower c1500

    So Id like some help . Saw some info about using K1500 upper control arms 2 help lower a c1500 did I read this right or was this some missinfo , If so more Info would be great . Oh Ya its on a 1998 gmt400 c1500 Thanks Keep the Shiny Side up
  12. dryslk

    Rear sway bars (anti roll bars) what got them and what didn't?

    a Tubular bar is reacts as a larger bar in that it has 2 working surfaces I played with the idea of making a tubular bar for a 70 chevelle wagon I had using a rear bar from same era common Monte Carlo .Making out of .125 wall CRO/Mo tubing ended up being 2.5 times stiffer I also had a...
  13. dryslk

    1-3/8 dia. front sway bar upgrade ?

    Yes a tubular bar of same size has a stiffer spring & rebound rate . this has a few advantages 1 being there are 2 working surfaces . there is a program 2 figuring out bar rates . i used a .875 tubular bar on the back of a vehicle & if memory serves it was 1.5 /2 times stiffer . If your...
  14. dryslk

    Hey I need some advice.

    I know this is obvious but have U checked UR firing order on the Dist just a thought Also U can turn the engine over on the crank dampner with a J bar its easier with the Plugs Out just Some thoughts :33::33:
  15. dryslk

    Rear disc conversion parts Canada..

    if it was me id look at similar year GM Cars that share the same rear axle or a close , what comes to mind 4 me is maybe Cadillac or other Gm cars that share that platform . id guess you would have 2 find /make mounting brackets & other stuff . but another good starting point might be brake...
  16. dryslk

    Fog Light With An Actual Fog Pattern?

    I have PIAA Dual Bulb Driving & Fog Combo Lights that can be controlled seprate & have the correct Yellow Bulbs in them from a company called Ralley Lights & am willing to sell at 1/2 the price of new + shipping
  17. dryslk

    1997 old man truck rehab

    NICE JOB Tastefully done I have an1998 & was wondering about lowering it .you did the same amount as I was looking at 4 mine IT LOOKS GREAT how does it ride , how lond 2 do the job ? THANKS 4 hte Great PICS & Writeup Gary :cheers:
  18. dryslk

    Tail Light Screws

    If it was me I would use 3 or 4 different types of scew head screws to mount your lights eg phillips , allen head , tourq , robertson , countersunk etc etc just a thought
  19. dryslk

    porting

    If it was me & I was looking 4 a bit of Perf upgrade on this motor I would Gasket Match all iNTAKE & EXHAUST, Manifolds & PORTS 2 THE GASKETS U are going to use . U dont have to go to far into the ports or runners Prob an >.5 /.75 inch should B good
  20. dryslk

    lowered truck.

    I come a dirt background as well How about using rear bar setup from a burban & some aftermarket good dirt shocks for street stocks , also I was thinkin of maybe getting a front bar bent up out of 4130 Chome Molly . as far as tires ,my choice would be one of the companies that make drifting...
  21. dryslk

    OPINION TIME!!!! Engine Flush and transmission flush

    If it was me to clean up the engine sludge i have used Shell Rotella 15/40 motor oil in the summer & never had a problem motor was nice & clean when i pulled the valve covers & intake
  22. dryslk

    New motor or rebuild?

  23. dryslk

    New motor or rebuild?

    FYI if it was mine Id find the best engine builder where you live .Its always easy to go bigger, but talk to the builder & maybe you couls make a nice stroker with the right cam & injection package
  24. dryslk

    Would like to post some pics

    Drop on truck is 4/6 235/75 15 Cover is a Lund Fiberglass . I think the Black Cherry Will make a nice color on your truck .
  25. dryslk

    Would like to post some pics

    hope thjis works 88 c1500

Latest posts

Staff online

Members online

... and 22 more.
Total: 1,828 (members: 72, guests: 1,756)

Forum statistics

Threads
64,457
Messages
1,394,542
Members
51,716
Latest member
Moesobs95

Share this page

Top