Search results

  1. Smitty82

    12200411 PCM swap for 1996 to 2000 GMT400 trucks

    Jeff I finally got it! Thanks so much
  2. Smitty82

    12200411 PCM swap for 1996 to 2000 GMT400 trucks

  3. Smitty82

    12200411 PCM swap for 1996 to 2000 GMT400 trucks

    jeff are u seeing these?
  4. Smitty82

    12200411 PCM swap for 1996 to 2000 GMT400 trucks

    Jeff, Ive ask several times for the pin out. I have a 411 computer ready to be installed... Can I please get it. [email protected] 1998 Motor 5.7L Trans 5 Speed Manual
  5. Smitty82

    12200411 PCM swap for 1996 to 2000 GMT400 trucks

    Jeff got my 411 today. Need the pin out. And a good place to send the ecu to get base tune. My email is [email protected] Thanks in Advance 5.7L 1998 5 speed Manual
  6. Smitty82

    Houston L31 Dyno Tuners?

    I'll ask him again. Thanks
  7. Smitty82

    Houston L31 Dyno Tuners?

    Hoosier street cars north of Indy
  8. Smitty82

    Houston L31 Dyno Tuners?

    No sorry I have found 1 shop in Indiana where I am working but he want 650$ and 3 days..... It would be nice to get the pin out sheet from lez. I have everything for the 411 swap. messaged him several times and nothing form him.....
  9. Smitty82

    Starting issues....sometimes

    If your truck is setting for long periods of time and hard to start then but start fine after just sitting for a breif moment you may have a bad spider harness or injector. Just my opinion. Hope you figure it out
  10. Smitty82

    Crank relearn when is it neede?

    Just want to know why you would have to do such a thing? Like what causes it to forget I guess. Seen it on Facebook today so now I am wondering.
  11. Smitty82

    Houston L31 Dyno Tuners?

    Does anyone in the Houston Area Know where is can get My truck Tuned? I have confirmed that HP tuner software can tune 97 and 98 GM black boxes. I am now on the hunt to find a shop. Ive been looking so if I find it before anyone here does I will let yall know :rockit:
  12. Smitty82

    Best 10$ performance mod!

    :gr_grin: So did mine!!! Lol
  13. Smitty82

    Clearance issues with distributor for cam offset retard

    Changed fuel filter. Holy black dirt! Runs a ton better! Still has a mild hiccup from 1,000-1,500 rpm but I think that is going to be because of a lack of tune for the cam that's in it. After 1,750 she is a smooth as a babies but! Thanks for the help!!! Oh and still no light
  14. Smitty82

    Clearance issues with distributor for cam offset retard

    I'm not sure. I could be just doing all of this for nothing. LoL J/K it's on for the cam/Crank correlation. Or it was. It's off now. Changing fuel filter now.
  15. Smitty82

    Clearance issues with distributor for cam offset retard

    I'll pick one of those up today when I go to auto zone and get code cleared. I'll give an update tonight. Next question I have. Do you still have the forked dizzy hold down or do you use the old style half moon? I had to take the new forked style off to get mine to the -2.9.
  16. Smitty82

    Clearance issues with distributor for cam offset retard

    2 months
  17. Smitty82

    Clearance issues with distributor for cam offset retard

    So the hiccup miss that I am feeling sometimes could be something else and I need to clear the code?
  18. Smitty82

    Clearance issues with distributor for cam offset retard

    Guys I have issues with my distributor hitting my intake. I am still -2.9 and I need to be 0+\-2. Any ideas? Also I installed the distributor correctly I think I followed this link http://www.gmtruckcentral.com/articles/distributor.html# An help would be awesome. I am tired of feeling that...
  19. Smitty82

    Texas meetup summer 2016

    Well at least you are starting off right. Keep at it young buck!!
  20. Smitty82

    Texas meetup summer 2016

    Suck it up Butter Cup LOL
  21. Smitty82

    Fluctuating idle/acts as if starving for fuel..

    while your at it. I would replace the intake gaskets. if your not pulling enough vacuum it could cause issues on every thing that surrounds the intake. so replacing all the other intake components will do you no justice. might be your issue if the truck set for a while.
  22. Smitty82

    The Stupid Tuning Question

    Need some good solid Tuning info. I know that I can swap to the 411 computer but I don't think I am ready for that. is there any good software tuning that I can get for my 98. I did the 5.0 to 5.7 swap and I am still running the base 5.0 tuning. it runs better but I feel like I still have a lot...
  23. Smitty82

    Texas meetup summer 2016

    I live in Walden. I think I have seen you Yukon Before :hitit:
  24. Smitty82

    Texas meetup summer 2016

    Near the Conroe Area.
  25. Smitty82

    Texas meetup summer 2016

    NeverMind....... read first two pages then jump to page eight..... just looked on page seven. No promises but I might be able to make. I lived in McKinney for years bought both my wifes tahoes from El Dorado Chevy dealer.

Latest posts

Staff online

Members online

... and 23 more.
Total: 1,798 (members: 73, guests: 1,725)

Forum statistics

Threads
64,718
Messages
1,399,408
Members
52,298
Latest member
joharri4

Share this page

Top