Search results

  1. whytry

    P0304 code advice??

    I did the spider injection changeover when I did a mini overhaul. So I did the following: Spider injection conversion New distributor New wires New plugs And ran 2 cans of seafoam through the vacuum lines and 2 through the fuel system...... Plug on that cylinder looks wet in comparison to the...
  2. whytry

    P0304 code advice??

    Checked, getting fuel, and spark..... still need to do compression check. Very frustrating
  3. whytry

    ABS light constantly on

    What’s the tone ring? Thanks for the suggestion I’ll check it once I know what it is lol.
  4. whytry

    P0304 code advice??

    I searched and nothing came up with my search. I have a 99 burb and recently got this code. I have done the following already. New plugs, wires, distributor, ran seafoam through and still get the P0304. I have a code reader and this is the only code showing. Erased codes and about 50 miles...
  5. whytry

    ABS light constantly on

    Thanks!! I have the same problem, ABS light is on constantly, so I recently did the brakes, and over the weekend put a new speed sensor on the front drivers side and it fixed it for about 30 miles and now its back on..... Any other ideas?
  6. whytry

    ABS light constantly on

    Can someone post a picture of where the ABS wheel sensors are on these trucks? 99 Burb and I ran the code and it says front left sensor....
  7. whytry

    Sway bars upgrade for 99 burb

    I did the bushing up front on the factory bar but still with the 305’s I get some rubbing on some corners and want to do what I can to prevent it more. I’ll check the junk yard and post my findings too for anybody else who might be interested
  8. whytry

    Sway bars upgrade for 99 burb

    Oh really... good to know. I’m going to go junk yard checking this weekend if it’s not raining and see what I can find. I know a couple places up near me that have everything from 1500’s to the 3500 and see what I can find. Might be all I need is to get one from a truck that doesn’t have one...
  9. whytry

    Sway bars upgrade for 99 burb

    Yeah it has rear sway bar on it
  10. whytry

    Sway bars upgrade for 99 burb

    I’ve searched and haven’t found an answer. I’ve read about others who have asked similar questions but I’m trying to upgrade my stock front sway bar to something stronger without so much body roll. It’s dropped 3/5 on stock 2011 Escalade 22’s with a 305. Sometimes side to side sway rubs the...
  11. whytry

    Blacked out 88-98 pictures?

    Before and after for mine!
  12. whytry

    Stiffest shock for 99 Lowered 4x4 burb

    nothing crazy on the drop just 2500 keys and spun down. But with stock escalade 22's sometimes they rub with the 305/35/22's on there in front. What shocks do you guys run upfront? I have redone all the bushing already and have a heavy duty shock now but wanted something stiffer if possible...
  13. whytry

    P0410 code help

    Awesome post! Thank you!! So after much work I found out the headers I have do not have the bung for the air injection setups. Is there a way to add this to the collector tubes? Or is there a way to 'trick' the system to not throw a code?
  14. whytry

    99 burb what does this do and where does the hose connect to?

    Awesome! Thank you East302!!
  15. whytry

    99 burb what does this do and where does the hose connect to?

    Hey all, I recently finished a motor swap as my girl blew the old one and it's been driving great but I did a recent check on everytime and I can't figure out what this does or where it connects to. There is a hose here but it runs to nothing right now... Any help is greatly appreciated!! Thx!!
  16. whytry

    P0410 code help

    i know it's secondary air system and it's a CA thing, but I'm getting this code how to diagnose and fix it? Anybody else deal with this in the past? I searched for the code and only one tread popped up and he had a timing issue. I had replaced the motor and had the same P0300 code and it was...
  17. whytry

    Does this have a fuse?

    Thank you guys!! Found the fuse and it was popped but barely visible!! Thank you. Fixed it and went to Disneyland!! Have a moment to respond now. Thank you!!
  18. whytry

    Does this have a fuse?

    have a tv wired to this wire but can't find if it is fused or not and if so where is the fuse. I lost power on the tv and found out it was accidentally grounded against a screw... help. Here is a pic of the wiring and excatly what wire I have it ran to. Please help taking the kids to...
  19. whytry

    99 burb vacuum line diagram

    hey all, recently did a motor replacement and a couple of the vacuum lines are broken and I'm sure the ones that are brittle are leaking. Is there anyone who has as diagram of where the line go and what goes where etc? I have atleast one that is broken and I'm not thinking some of these...
  20. whytry

    Helps. Can't get timing to cylinder 1 tdc on distributor

    Has anybody done this themselves? It looks simple enough. Just need some clarification on what he means by spark straight up
  21. whytry

    Helps. Can't get timing to cylinder 1 tdc on distributor

    Both of the codes are same. Just top right where it says 1/2 the next code is same but shows 2/2
  22. whytry

    Helps. Can't get timing to cylinder 1 tdc on distributor

    i haven't done anything besides get it running and started and went for a short drive around the block and that's when I noticed the sluggish side. Just ran codes and I got this
  23. whytry

    Helps. Can't get timing to cylinder 1 tdc on distributor

    You guys rock! Thank you so much for that!! Got it running, but it definitely doesn't have any balls right away. Do I need to drive it for it to learn or do I still need to do more? It will free rev pretty good but driving under load it is really sluggish... tips?
  24. whytry

    Helps. Can't get timing to cylinder 1 tdc on distributor

    From what it seems no. It doesn't sit all the way down. I'll try again
  25. whytry

    Helps. Can't get timing to cylinder 1 tdc on distributor

    hello, I did a motor swap and in process did intake manifold gaskets and new mpfi as well. So that meant pulling the dist. I thought I had it marked properly put it in and now car won't start. I turned motor to #1 tdc pulled cap off rotor and its pointing here. Which is not at 1 or 6...

Latest posts

Staff online

Members online

... and 28 more.
Total: 1,883 (members: 78, guests: 1,805)

Forum statistics

Threads
64,497
Messages
1,395,241
Members
51,825
Latest member
smit1955

Share this page

Top