Recent content by Zx1000hd

  1. Zx1000hd

    Vrfpr install

    I've seen on many threads that most have the vrfpr but how does it get installed? Do you just remove the diaphragm or spring? I have a slightly over stock 7.4l planning on tearing into fixing the small stuff this winter I have the ebl flash already just need time to install. But haven't seen any...
  2. Zx1000hd

    Eaton TrueTrac or Detroit Locker? Which gets the nod?

    I love my Spartan locker. It's over Half the cost of a true trac and takes about 2 hours to install yourself.
  3. Zx1000hd

    no cheap lockers for 6 lug open diff?

    In northern Michigan I get the same issue. I'm in the process of installing Yukon grizzly locker. Just waiting on ring gear bolts
  4. Zx1000hd

    454 TBI 4l80e FI tech or fast efi install help

    I would like to change to FI tech or fast efi system any tips or pointers. I realize I'll need to change my fuel pump. Mostly wondering how to get my transmission to shift correctly once I remove the TBI. I have a 92 so it is the one year trans plug that isn't common. So doing a trans controller...
  5. Zx1000hd

    Aux Fan

    I have a 92 C2500 my 454 has two temp sensor and one temp switch one in each head. The passenger side head is the temp switch side. It runs to a relay on the driver's side fender just before the hood hinge. To power the aux fan over 220° which is on most of the time because those BB are just...
  6. Zx1000hd

    Gear ratio identification

    The RPO TAG in the engine compartment just to the right of your master cylinder on the firewall should have the OEM code.
  7. Zx1000hd

    Big Block Swap Cooling

    I have an 11 blade ac Delco p/n 15-80739 Instead of the 5 blade to my 454 but in the Phoenix heat it's still 225/230 in traffic the aux fan does help. But it does require the right side coolant temp switch not sensor and it is set at 225°.. I also have an 03 c2500 radiator in mine as well.
  8. Zx1000hd

    14 bolt srw disc conversion issue

    JB7 master , non hydro boost, no proportion extra proportion valve.
  9. Zx1000hd

    14 bolt srw disc conversion issue

    They have been very helpful. They haven't had this issue tho.. I think i may have fixed it today. I was trying to make the lazer cut brackets fit too tight causing it to not engage the disc correctly. I opened up both sides of the cailper mount bracket.. so .010" shims fit on both sides. It...
  10. Zx1000hd

    14 bolt srw disc conversion issue

    I am at my end and ready to reinstall my drums.. I have a 14 bolt ff srw, i did a conversion to disc using lug nut 4x4s kit with emergency brake. The problem is the passenger side vibrates when the brake is applied. Goes away under heavy braking but light contact it just sings like its in the...
  11. Zx1000hd

    92 c2500 Convenience Center connectors

    Thank you, I realize auto recyclers would have a few but they are also 15-20 years old and I'm already having issues with some breaking on my project. So buying a used one for a premium at a junk yard seems like a bad investment, but I do appreciate you suggestion. I was hoping for the design...
  12. Zx1000hd

    92 c2500 Convenience Center connectors

    Does anyone have a source or know what connectors will work for the convenience center? I would like to use the OEM connectors so it will look correct.
  13. Zx1000hd

    Drop in full float upgrade?

    I used a lugnut4x4.com kit on my 14b full float srw 8 lug. Not sure what rotors but it says in the kit. Took some light Fab work to make thier kit fit just right but I still have the park brake..using 78 caddilac cailpers. I know it's not the big drums but with the horrible design of the wheel...
See more

Latest posts

Staff online

Members online

... and 20 more.
Total: 1,848 (members: 70, guests: 1,778)

Forum statistics

Threads
64,490
Messages
1,395,129
Members
51,812
Latest member
jealousy2500hd

Share this page

Top