Recent content by wickedsick

  1. wickedsick

    My first V8 project for street strip use.

    I have no tuning solution currently. i plan to do a wet shot with a plate. I ran a 75 shot with some race gas on my AUDI. it ran at 11.5 afr. but i had no timing control then either.
  2. wickedsick

    My first V8 project for street strip use.

    I think he ran 11.7 and i ran a 13.7
  3. wickedsick

    My first V8 project for street strip use.

    If you want to see a low quality youtube video of my audi against my friends camaro its at
  4. wickedsick

    My first V8 project for street strip use.

    anyone have experience with NOS on a 4.8? what is a safe level without ring gap on a stock setup?
  5. wickedsick

    My first V8 project for street strip use.

    I have a 99 audi a4 that i took to the dragstrip a couple times but it is not the best idea to have one car that you race and rely on to get to work. i was able to run a 13.7 at 90 with an ebay tune and NOS. it was the audi that had nos. i plan to switch the the nos kit to the truck in hopes...
  6. wickedsick

    My first V8 project for street strip use.

    I got some belltech 1 in drop front springs thinking the springs that came with the truck were more than that. The belltech springs were at least one inch taller than what came of it but in the end it was very little difference in ride Hight. It seems like the IHC control arms are intended for...
  7. wickedsick

    My first V8 project for street strip use.

    i bought the truck based on the fact that it wasn't rusty, not a lot of body issues, and the engine swap was done and driving. friend price helped too. the specs are pretty well un known. we found a sticky note in the glove box with a vin for a vehicle that the ls came out of. i believe it...
  8. wickedsick

    Clutch pedal bracket mounting

    Any other options yet? i need to mount my clutch but truck doesn't have the bracket. I tried to have the clutch assembly reinforced with weld but the 2 bolts to the master cylinder just aren't enough. it cracked on the last owner but I'm not confident even with the welds.
  9. wickedsick

    My first V8 project for street strip use.

    recently got a deal i couldn't pass up on a 1994 1500 truck. its not the best time for me to take on a build but i got some help with storage and knowledge. My best friend told me if i got this truck i could store it in his garage. Here in Maine vehicle get destroyed by salty snowy roads so a...
See more

Latest posts

Members online

... and 13 more.
Total: 2,081 (members: 63, guests: 2,018)

Forum statistics

Threads
64,708
Messages
1,399,223
Members
52,281
Latest member
jmiller4

Share this page

Top