Recent content by thatclappedsilverado

  1. thatclappedsilverado

    Tbi 305 stalling/hard start

    I have not. Genuinely haven’t messed with the obd1 system at all. And it’s currently acting up. I have had to keep the pcv port unhooked and it fires right up and idle albeit high due to the vaccum leak. Wondering if the iac needs reset since being unplugged due to swapping engines.
  2. thatclappedsilverado

    Tbi 305 stalling/hard start

    No light on dash for cel
  3. thatclappedsilverado

    Tbi 305 stalling/hard start

    Got an interesting problem and im not exactly sure what to look for. I have a 95 k1500 5.0/5spd from the factory. And I cut up the harness when I was 16 to carb swap the truck. Just put another tbi 305 with a wiring harness in the truck and been having an issue where the thing refuses to idle...
  4. thatclappedsilverado

    Floor shifter boot

    What’s the part number on the boot and how’s it fit?
  5. thatclappedsilverado

    95 k1500 5.3 swap fuel lines

    5.3 with return rail, looking for the easiest way to hook up the fuel lines, really dont want an lines want it to look fairly oem, Saw somewhere that you can use the factory tbi lines with adapters on the ends to hook up at the rail. Any input would be great besides waiting on my mounts and...
  6. thatclappedsilverado

    95 K1500 "ole blue"

    Well, the 5.3 is still the end goal with this truck, currently its still got the 355 in it and i now runs a hell of alot better, at some point one of the vaccum caps developed a crack and began leaking, and the timing was way out, i mustve not had it set correctly when i re seated the dist, and...
  7. thatclappedsilverado

    95 K1500 "ole blue"

    So after the many ups and downs ive had with this truck since ive last posted its come to the point to where its getting a 5.3 put in it. Initially i had swapped in another sbc. This time it was a built bottom end 355 with aluminum heads and ive had nothing but issues with the carb and the top...
  8. thatclappedsilverado

    Manual Trans LS Swap Questions

    Curious how you guys absolutely destroy the 3500s mine has 180k and a lot of clutch dumps and banging gears behind a 305, 2 350s and a built aluminum head 355. It’s always had Atleast 33s on it and I’ve never had an issue with it no noise nothing.
  9. thatclappedsilverado

    355 Looses power around 5000rpm

    its carb with big cap hei no computer control besides fuel pump which eventually is going to get ran to a stand alone relay when i get the time to go through the wiring
  10. thatclappedsilverado

    355 Looses power around 5000rpm

    Sorry if I’m just stupid but what is kc and kr?
  11. thatclappedsilverado

    355 Looses power around 5000rpm

    Put 93 in it today and ran it around and it’s now running fine. Curious why that change would affect it? Not too high of compression.
  12. thatclappedsilverado

    355 Looses power around 5000rpm

    not that i noticed, doesnt ping from what i can hear. ill have to pull them again and look over them completely. And nothing else changed when swapping carbs other than having to add a 1" spacer to clear the fuel line on my intake. All the local guys that build engines told me to stick with a...
  13. thatclappedsilverado

    355 Looses power around 5000rpm

    plugs look pretty good in it not rich not lean but thats the plan, gotta save up some cash just bought a cam kit and hp tuners and wideband for my other truck
  14. thatclappedsilverado

    355 Looses power around 5000rpm

    650cfm same as the holley, and cam is 230/236 @ 50 and .519/.522
  15. thatclappedsilverado

    355 Looses power around 5000rpm

    It ran fine up to 6500 rpm with the edelbrock when it would want to work. and closed is 145 and open is 360 and comp reccomends 290lbs open and 110 closed. in theyre reccomended parts list.
See more

Latest posts

Members online

... and 10 more.
Total: 1,645 (members: 60, guests: 1,585)

Forum statistics

Threads
64,360
Messages
1,392,103
Members
51,485
Latest member
DonnieBhn

Share this page

Top