Recent content by RamahX

  1. RamahX

    i dont know where to begin

    If its never been wrecked and a good solid straight body, plus the engine drivetrain are good it's a good investment nowadays. I paid $3700 for my '94 Z-71 back in 2010. Since then I've replaced the tires (Michelin MS2's), A/C compressor and condenser, radiator, brakes all around, and now the...
  2. RamahX

    Can I Swap a 94 K1500 3.73 Rear End with 93 Suburban 4x4 (same 3.73)?

    Well, scrub this. The Suburban diff had broken carriage...
  3. RamahX

    Newest Rear Or what's an upgrade for GMT400 K1500

    Will my current u-bolts fit a 14sf 6-lug? Found one for $500. I also understand I need a u-joint '*******' adapter. And is the G80 in the 14 better/different than the so called gov-bomb in the 10 bolts?
  4. RamahX

    Newest Rear Or what's an upgrade for GMT400 K1500

    What's the RPO for the 14bsf with 6 lugs? And is it the same G80 locker?
  5. RamahX

    Newest Rear Or what's an upgrade for GMT400 K1500

    Will a NBS rear 3.73 fit one of ours? i.e. would say a 2005 fit my 94 K1500. Or... What upgrade fits i.e. would a K2500 rear fit (same ratio).
  6. RamahX

    Can I Swap a 94 K1500 3.73 Rear End with 93 Suburban 4x4 (same 3.73)?

    What about the sway bar? It's removable.
  7. RamahX

    Can I Swap a 94 K1500 3.73 Rear End with 93 Suburban 4x4 (same 3.73)?

    Now I'm starting to wonder if I should just swap the ring and pinion and just keep what I have. I understand how it's done - setting backlash and blue printing. Just wondering how hard in reality it is to do while my rear is still in the truck...
  8. RamahX

    Can I Swap a 94 K1500 3.73 Rear End with 93 Suburban 4x4 (same 3.73)?

    So a sway bar is not better?
  9. RamahX

    Can I Swap a 94 K1500 3.73 Rear End with 93 Suburban 4x4 (same 3.73)?

    Question, what is 14bsf, and why wouldn't they put a sway bar on a truck?
  10. RamahX

    Can I Swap a 94 K1500 3.73 Rear End with 93 Suburban 4x4 (same 3.73)?

    Yes, got the one with the sway bar and took the mounts also. My truck has mounting holes for the sway bar brackets on the frame, same place as were on the Suburban. Both are 6 lug, as both are 4wd. 10 bolt on both, but the Suburban didn't have the G80 locker (my truck did). Already bugged y'all...
  11. RamahX

    Can I Swap a 94 K1500 3.73 Rear End with 93 Suburban 4x4 (same 3.73)?

    My Truck = '94 K1500 Donor Truck = '93 Suburban 4x4 Same ratio 3.73 Can I swap? I already have it, only paid $80, but now someone told me they aren't interchangable. I measured the rear-ends, same from backing plate to plate, and same from mounting point to mounting point (to leaf springs).
  12. RamahX

    GT4 only to replace GRT4/G80?

    That was a typo in the subject line. New phone... GT4. Yes, old one was a GT4, yes I know about GM's ridiculous decision to put the RPO codes in the BOTTOM of the GLOVE BOX ;-< Every time we found a truck in the junk yard the codes were worn off the sticker or faded from people actually...
  13. RamahX

    GT4 only to replace GRT4/G80?

    My rear diff went out, and had the G80 locker. I found and removed/purchased a GT4 only from a junkyard in good condition for $80.00. It came out of a 93 4wd Suburban. My truck is a 94 Z71 4wd. Is it okay to NOT have the locker? I know the G80 was problematic, and my thoughts were if it's 4wd...
  14. RamahX

    What happened?

    I have some idea's, I had some vibrations in the transfer case. While inspecting the drive train, noticed a bb sized dent from the INSIDE on the rear end cover. Pulled/drained, and found a broken tooth part from the pinion, and two adjacent teeth chipped. What could have caused this? Again, I...
See more

Latest posts

Staff online

Members online

... and 15 more.
Total: 1,752 (members: 65, guests: 1,687)

Forum statistics

Threads
64,966
Messages
1,403,655
Members
52,843
Latest member
Tacopoo

Share this page

Top