It started out with the DJM 2” springs with their tubular upper and lowers and flip kit in the rear.
The truck didn’t have the rake and ride I was looking for so that’s why I went with the coil overs. The coil overs actually dropped the front ride height another inch so is probably closer to a...
Don't be sorry! Ask away....
I did 3 coats of base and didn't need to wet sand anything out and then 3 coats of clear. First a light coat followed by two heavy coats.
I will wet sand the clear with 1500,2000 and 3000. (I probably didnt need the 3000) Then buff and polish everything out.
The...
Just a 60 gallon air compressor and the $70 gun from Harbor Freight.
Used Nason base and clear.
Using the base/clear is pretty forgiving as you can wet sand most of the trash out.
I just blew the garage out the night before and wet the floor down right before I spray.
Hope that helps!
Finally getting back to the truck.
Waiting for the body panel adhesive on the roll pan to set up so I power washed the frame and will put a coat of Chassis Saver paint on it.