Recent content by Octane Art

  1. O

    P1345 P1351

    "If you have the intake apart, consider installing an electronic-injector upgraded spider." Is that the MFI spider? I also have to look into the Kommi law here in ca if that is legal to do or not. Do you have a part number for the upgraded spider? Thank you
  2. O

    P1345 P1351

    Finally just getting back to the truck. its a 96 c1500 5.7 Silverado trim. My wife has been dealing with a few health issues, so the truck has been on the back burner. I have a coolant leak leaking into the drivers side of the engine. There is a small puddle forming at the exhaust tip on the...
  3. O

    P1345 P1351

    Hey All, I am completely baffled on these CEL codes p1345 p1351. I have a 96 C1500 5.7 auto with 211k on the truck. I bought it because it needed a new transmission. I got it home and proceeded was giving it a tune up plugs wires cap and rotor. the previous owner had use a drywall screw to hold...
  4. O

    Harness location

    Thank You! There were three possible mounting points for it. Its now in its proper locatiion. Greg
  5. O

    Harness location

    I have a 1996 c1500 with a 5.7. I had to replace the exhaust manifold and the EGR tube and in the process noticed that the harness on the drivers side that goes to the a/c temp sender etc. is just laid up on top of the radiator hose. There is a mounting bracket on the harness and an empty peg...
  6. O

    Wire harness schematitic

    Thanks you again for all of your help just checked out the alldatadyi.com and am going top subscribe $44.95 for 5 year access to my vehicle. You cant beat that .
  7. O

    Wire harness schematitic

    You are my Hero! That clears up just about every question I had The only thing that would make it better is a diagram of the 95 convenience center like the one you provided. but I will take and back trace those with the volt meter from the fuse box to the center. Thanks you again for the quick...
  8. O

    Wire harness schematitic

    Hi All, First post on the forum. I decided to join because everything thing that I looked up via google that had any merit to it seem ed to come back to this forum. I am in the process of build a 95 3500 crew cab and am doing some upgrades. It originally was a SL package and didn't have power...
Top