Recent content by noncarbonated

  1. N

    The old cranks no start problem

    Thank you for the encouragement man! So long story short, it was the ICM. I learned a trick from a friend of mine, disconnect the 4 pin connector on the ICM, jam a wire in the purple/white connection, lick your finger and touch the positive battery terminal at while touching the attached wire...
  2. N

    The old cranks no start problem

    Thank you sir will check in the morning!
  3. N

    The old cranks no start problem

    Hey guys! Ok yeah there is 12ish volts at the injector plugs, so I'm guessing that the ecm isnt grounding. Tried a new ECM, still the same show, injectors not firing. Whats the next best step? I cant believe such a simple system has me beat! Thanks in advance
  4. N

    The old cranks no start problem

    ok seems reasonable. I checked the ign and ign a+b fuses earlier with voltmeter both checked good. I'll check ground on harness. man just such limited can't wait to retire. thanks
  5. N

    The old cranks no start problem

    Ok got a noid light, its a no go on either injects, no light while cranking. also, if I connect a 9v to the injectors, they will spray the initial priming fuel out just fine. thinking ECM? is there an injector relay perhaps?
  6. N

    The old cranks no start problem

    thank you for the advice. the injectors are new Rochester off ebay I will get a noid light to see if the ecm is communicating with them. the fuel is fresh maybe a month old. this thing is keeping me up at night! hopefuly this weekend!
  7. N

    The old cranks no start problem

    It has a newer tps which i replaced a few years ago when it was running, but it could still be a potential issue. ugh
  8. N

    The old cranks no start problem

    ok thank you will give 'er a try tomorrow
  9. N

    The old cranks no start problem

    Greetings, I have a 1992 Chevrolet K1500 4x4 350 tbi. Truck has not been ran for maybe 4 years, ran when it was parked. Cranks, no start, fires if fuel is poured into the the tbi. In attempting to troubleshoot this I have replaced the ICM, injectors, fuel pump. Gets fuel pressure at the tbi...
  10. N

    I have injector questions if anybody can fill me in

    You ever figure out the cause of the problem? I seem to be suffering from something similar.
  11. N

    New from SoCal

    Thanks guys, im out here in a little town, Blythe, so theres plenty of desert driving to do. I've had this truck for a while, just decided it was time for it to get treated like it should be, has a 383 and a built trans (not sure what model), looking forward to getting this lift on!
  12. N

    New from SoCal

    Wanted to introduce myself, proud owner of a 1992 K1500 regular cab step side, just got a cepek lift for it... im sure plenty of questions will follow, looks like an awesome forum!
See more

Latest posts

Members online

... and 8 more.
Total: 1,455 (members: 58, guests: 1,397)

Forum statistics

Threads
65,061
Messages
1,405,039
Members
53,035
Latest member
dirtboy817

Share this page

Top