Recent content by ericg75

  1. E

    1988 GMC Sierra C1500 SLE RCLB

    Love the look of your truck. I have an 88 c1500 rclb that I'd like to get looking just like yours. Questions, what size tires are those, what's the make and model of the rims, and did you level the front with spacers?
  2. E

    Tunerpro help

    In the last few months I've gotten my rebuilt engine installed and running. It's been an adventure for sure but I'm pretty proud of the progress made. I did the break in for the cam and now I'm waiting on the new plate and registration. The problem I'm facing right now is the truck seems to...
  3. E

    mystery wire

    In that first picture I'm guessing that's a connector for an O2 sensor. As the old exhaust is long gone I'm trying to figure out if that sensor will go in the y pipe or after the y pipe? I'm also guessing wherever that sensor goes it will have a long wire as that connector in the picture is...
  4. E

    Power steering cooler delete?

    Thanks, i should have paid attention before getting the pulley installed and mounting it. I sourced the correct pump. Do I have the lines correct now?
  5. E

    Power steering cooler delete?

    Okay, two questions. Did I get the lines back in the right places and why does this pump have a third pipe on it? Is that a vent of some sort? It's a little hard to see but the high pressure line is closest to the rad (if it were installed).
  6. E

    mystery wire

    Next one seen resting on the coolant line. I think I got the the 2 ground wires in the second photo in the correct places by the thermostat housing.
  7. E

    mystery wire

    Thanks! I have to get pictures of the rest but that's at least one down.
  8. E

    mystery wire

    The good news is after about 12 years I have an engine back in my truck. The not so good news is I have a few connections that I don't know where they go. The first is a purple wire that's in the same loom as the knock sensor. Any ideas where this connects?
  9. E

    heads and a roller cam

    So the Summit heads I ordered keep getting the delivery pushed back. It's very frustrating. My engine builder says they have a set of these heads in stock. Any experience with Liberty heads? https://www.libertyperformance.com/product/assembled-200cc-intake-runner-64cc-combustion-chamber/ They...
  10. E

    Shorty Headers

    I think I'll be picking up a set of G9014 as I intend to remove the AIR pump. With regard to the lack of a high temp coating, should that be completely removed and then painted with a high temp paint or can it just be scuffed and painted?
  11. E

    Thread repair on intake manifold coolant port

    Agreed. That's what it was.
  12. E

    Thread repair on intake manifold coolant port

    Update on the intake. So if you look at the original pictures you'll see a flat ring about 5 threads down in the hole which made no sense to me. The tap just rode on top of it and wouldn't engage. Turns out that was some kind of pipe dope that hardened and created a seat. It also filled most...
  13. E

    heads and a roller cam

    I'm confused. I thought in your earlier post you said in an aluminum head, you need long reach and gaskets instead of taper seat.
  14. E

    heads and a roller cam

    What do you mean long reach? Not familiar with that term.
  15. E

    heads and a roller cam

    @PlayingWithTBI What make and model plugs are you running in those heads and what is the gap?
See more

Latest posts

Members online

... and 4 more.
Total: 1,567 (members: 54, guests: 1,513)

Forum statistics

Threads
64,355
Messages
1,391,971
Members
51,474
Latest member
Ledonkey

Share this page

Top