Members

ericg75

Newbie From PA

Joined: Nov 5, 2022

Last seen: Mar 10, 2023

Latest activity Postings About

- E
  
  ericg75 replied to the thread heads and a roller cam.
  
  So the Summit heads I ordered keep getting the delivery pushed back. It's very frustrating. My engine builder says they have a set of...
  
  Feb 1, 2023
- E
  
  ericg75 reacted to PlayingWithTBI's post in the thread Shorty Headers with Like.
  
  They say to remove the paint completely before painting it with high temp paint. Here in the desert, I just left them the way they were...
  
  Jan 18, 2023
- E
  
  ericg75 replied to the thread Shorty Headers.
  
  I think I'll be picking up a set of G9014 as I intend to remove the AIR pump. With regard to the lack of a high temp coating, should...
  
  Jan 17, 2023
- E
  
  ericg75 replied to the thread Thread repair on intake manifold coolant port.
  
  Agreed. That's what it was.
  
  Jan 11, 2023
- E
  
  ericg75 replied to the thread Thread repair on intake manifold coolant port.
  
  Update on the intake. So if you look at the original pictures you'll see a flat ring about 5 threads down in the hole which made no...
  
  Jan 11, 2023
- E
  
  ericg75 reacted to PlayingWithTBI's post in the thread heads and a roller cam with Like.
  
  Yeah you're right, I should have said Vortec and aluminum heads take long reach but, aluminum heads take gasket seat. :33: Edit: I...
  
  Jan 11, 2023
- E
  
  ericg75 replied to the thread heads and a roller cam.
  
  I'm confused. I thought in your earlier post you said in an aluminum head, you need long reach and gaskets instead of taper seat.
  
  Jan 11, 2023
- E
  
  ericg75 replied to the thread heads and a roller cam.
  
  What do you mean long reach? Not familiar with that term.
  
  Jan 11, 2023
- E
  
  ericg75 replied to the thread heads and a roller cam.
  
  @PlayingWithTBI What make and model plugs are you running in those heads and what is the gap?
  
  Jan 11, 2023
- E
  
  ericg75 replied to the thread Did I damage the proportioning valve?.
  
  Thanks Schurkey. I've been looking for a reason to buy one of those IR thermometers. Between brakes and checking various header temps...
  
  Jan 4, 2023
- E
  
  ericg75 reacted to Schurkey's post in the thread Did I damage the proportioning valve? with Like.
  
  Make sure you have a high, firm pedal before driving it. As you drive, be sure to notice improper braking action--pulling to one side...
  
  Jan 4, 2023
- E
  
  ericg75 replied to the thread Did I damage the proportioning valve?.
  
  The truck hasn't run in over 20 years and I don't really remember how the brakes performed then. The lines were pretty well rusted...
  
  Jan 2, 2023
- E
  
  ericg75 posted the thread Did I damage the proportioning valve? in Axles + Brakes.
  
  While waiting for engine parts I decided to bleed the brakes on the truck. All new calipers, pads, rotors up front and rebuilt drums in...
  
  Jan 1, 2023
Show older items
Loading…
Loading…