True. I would have preferred to have gone with a full center console or possibly a new style jump seat.
No plans to modify the shape, size, or thickness of it, due to the plastic/metal mostly dictating the size and shape. I may remove some foam though, to run the wiring harness for the audio and...
They are glued together. Just took mine apart yesterday.
But I couldn't really mount the aftermarket tweeters with them. I used the mounts that came with the component speakers.
Your second picture. Stick a flat-head between the two plastic pieces. Underneath where the connectors and wires are...
I've been driving around with it for a couple weeks now.
I feel there are some things I need to make known if you're planning on doing this yourself.
1. It's wider, mostly on the driver's side. So it will rub a bit when moving the armrest and/or tilting the driver's seat. It's not really a big...
This is the backside of it. The black plastic piece is held in by 3 rivets.
I drilled them out and removed it. But the larger pin in the center needed to be removed as well. It appears to be tack welded. I drilled it out, from the backside, leaving the outer ring in place.
The following pic is...
Hadn't seen this done before, thought I'd share.
My old armrest in my 98 K1500 ext cab broke pretty hard.
I had played with the idea before, throwing in a newer armrest, but couldn't find any threads or pictures of this being done before. To be clear, this is actually the arm rest/upper...