DieselBlood
Newbie
Made my own plate to delete my evap valve and in the process of building an egr delete plate also. just wanted to clean up the engine bay some so i can eventually ls swap
Cut bottom flange off valve and sanded smooth and flat
Made a cover plate from 1/4" flat stock and drilled 2 holes to fit the 2 m6x1.00 bolts
Installed evap valve flange to bottom of plate with a thin layer of silicone
Then installed with 3/4" longer m6x1.00 allen head cap screws
Still want to form the plate to match the valve flange better but could always do that later then put a better coat of paint on it
Cut bottom flange off valve and sanded smooth and flat
You must be registered for see images attach
Made a cover plate from 1/4" flat stock and drilled 2 holes to fit the 2 m6x1.00 bolts
You must be registered for see images attach
Installed evap valve flange to bottom of plate with a thin layer of silicone
Then installed with 3/4" longer m6x1.00 allen head cap screws
You must be registered for see images attach
Still want to form the plate to match the valve flange better but could always do that later then put a better coat of paint on it