mackguy
I'm Awesome
Found it, thanks!
Might be a screw on cap covering it.
You must be registered for see images attach
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Might be a screw on cap covering it.
You must be registered for see images attach
What year and 350? Ill take a pic of my 95 350 Tahoe if it helpsWhenever I run my Suburban the belt slowly walks about halfway off the idler pulley...what gives? Is there supposed to be dust shield like thing on the back? I have the one on the front but can't remember if there was one on the back or not
Its a '93 5.7L
You have a belt alignment issue or a bad pulley/bearing.Whenever I run my Suburban the belt slowly walks about halfway off the idler pulley...what gives? Is there supposed to be dust shield like thing on the back? I have the one on the front but can't remember if there was one on the back or not
You have a belt alignment issue or a bad pulley/bearing.
Not being a jerk here but you ask for help and neglect to mention new parts or what you do know about the problem. Then you say that you know that. How are we (the forum) able to help you if you know everything and keep us in the dark?Well I know that...idler pulley/bear is brand new. Has maybe 10 minutes of run time.