torq4u
Newbie
- Joined
- May 20, 2013
- Messages
- 15
- Reaction score
- 0
so if a previous owner put a flip kit on turned around , would the pinion be about 20 degrees nose up ?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
no shims , I had hoped that was it .I think normally one side is a little taller...I would say that is probably what's up. It doesn't have pinion shims does it ? because those could possibly be in the wrong way as well.
Sent from my HTCONE using Tapatalk
ok i'll tear it down and take a look , better get a c-notch first . thanks for the input .mine were the same on both side... but then my axle twisted and bent one side over ...