The Body Lift Thread

[Butch]

Boggers

yea I don't see how he can turn much though, but I guess it works ok, around here they'd never pass for a sticker, gotta have flares covering your tires.

Florida's pretty lax on lift/tire laws, basically as long as your tires are within the lines your good.

 

[Swims350]

LUkcy guys... lol

here your frame or bottom of your bumper cannot be over 31 inches off the ground, whichever is lower, and on mine the front frame horns are the lowest point.

Can't be no more then a 3 inch body lift, and if your tires stick out about an inch you gotta use flares and you're not supposed to have tires stick out past the flares. Someone even said you got a set width on flares as to how far they stick out.

Anything over 10k gvrw is good to go with anything though.

ANY time you do ANY lift you must get a "modified" inspection sticker which is double the cost of a reg. sticker. You can't have exterior lights that were not on the truck factory either.

BS huh?

 

[badassformula383lt1]

yea that is BS id move lol

 

[4x4chevy]

Thats why i love too live in florida ,I can lift my truck up to the ass and run 35x15 and be fine lol

 

[badassformula383lt1]

where at do u live at in FL?

 

[Swims350]

well to stay legal here I think I figured once I can do a 6.5 lift and 3 inch body and run like a 38 or 39 and be right on the frame limit or close to it.

 

[Smith]

so anybody here have thos body bolts lol

 

[iLikeMyTruck]

3/4 ton torsion bars
3" body lift
265/70r16 tires

You must be registered for see images attach

same with 37's on 17" 05 Escalade wheels
no spacers. can still turn the steering wheel 3/4 turn then rubs on the frame at the rear (can't trim that!)
I can barely turn right at stop signs without a rub, anything tighter I do a 3 point turn just to be safe.

You must be registered for see images attach

 

[jcro61]

3/4 ton torsion bars
3" body lift
265/70r16 tires

You must be registered for see images attach

same with 37's on 17" 05 Escalade wheels
no spacers. can still turn the steering wheel 3/4 turn then rubs on the frame at the rear (can't trim that!)
I can barely turn right at stop signs without a rub, anything tighter I do a 3 point turn just to be safe.

You must be registered for see images attach

Do you have blocks in the rear at all? or is it just leveled?

 

[the big blue bus]

got mine done a few weeks ago in my drive way. just made my gap guards and painted the frame a week ago. loking for tires still haha but im only 16 gotta work my way there.

You must be registered for see images

You must be registered for see images

You must be registered for see images

You must be registered for see images

You must be registered for see images

You must be registered for see images