jus10inbrla
I'm Awesome
Well got it all fabbed up finally. I had this winch on a cat eye z71 with the ranch hand hidden receiver so decided to build one for the 93. Also bolted in some receiver bars where oem tow hooks went for shackles.
frame is a 3x4x 1/4 angle iron, with 3/8 plate for ends. All i did was reuse one hole where skid plate bolted in and drilled 2 new 1/2 holes in each. Then cut out hole in center of bumper for hitch. I got the sb350 quick connect on front and rear of truck as well as on the winch and jumper cables. Controls i used a 4 pole round trailer connector. Let me know what yall think and any suggestions.
frame is a 3x4x 1/4 angle iron, with 3/8 plate for ends. All i did was reuse one hole where skid plate bolted in and drilled 2 new 1/2 holes in each. Then cut out hole in center of bumper for hitch. I got the sb350 quick connect on front and rear of truck as well as on the winch and jumper cables. Controls i used a 4 pole round trailer connector. Let me know what yall think and any suggestions.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach