THZ71's M1008 build

[bluex]

What axle you putting back under the front of it?

 

[thz71]

What axle you putting back under the front of it?

That same 60. Next step up would be a big $$ step haha

 

[Darkrider]

Was wondering if you ever got the flatbed on. I see that you have. Looks good.

 

[thz71]

Was wondering if you ever got the flatbed on. I see that you have. Looks good.

Thanks man. Yah she's coming along at a pretty good pace right now.

 

[thz71]

Had to use the hi lift to get the body off the mounts

You must be registered for see images attach

front leaves brackets shackles and body mounts off.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[thz71]

Girly friend help in clean up the 60

You must be registered for see images attach

As clean as its getting

You must be registered for see images attach

Primer

You must be registered for see images attach

first couple coats

You must be registered for see images attach

frame cleaned

You must be registered for see images attach

primer

You must be registered for see images attach

paint

You must be registered for see images attach

putting my leaves together with my fancy new UHMW

You must be registered for see images attach

You must be registered for see images attach

zero rate on

You must be registered for see images attach

paint

You must be registered for see images attach

 

[thz71]

Got these welded on

You must be registered for see images attach

Old pitman arm off

You must be registered for see images

Also got the headers off the heads just gota take the collectors off and they're out

 

[thz71]

What ended up left of the headers

You must be registered for see images attach

Pulled the driveshaft out

You must be registered for see images attach

to get these cut off

You must be registered for see images attach

Flatbed is starting to get full of old parts

You must be registered for see images attach

 

[thz71]

Ordered 2 inch body lift pucks for it

 

[thz71]

Headers needed to be clearance for the water temp sensor

You must be registered for see images attach

Got um on

You must be registered for see images attach

little shorter than my old ones so I'll have to redo the exhaust

You must be registered for see images attach

tried my hand at clearancing the drive shaft. Before

You must be registered for see images attach

after

You must be registered for see images attach

You must be registered for see images

b-52 brackets mounted. Broke a bolt so I need to get one

You must be registered for see images

Had to drill out the shackle holes and repaint

You must be registered for see images

Took all the body bolts out. 2 nuts broke loose so I had to cut 2 holes in the floor

You must be registered for see images