-
-
Awesome progress I’m impressed! -
Jman95 replied to the thread My 99 K2500 Suburban.After I cut off the perches and ground the tubes smooth, I mocked it up. After some careful measuring I will tack the perches and...
-
-
Jman95 replied to the thread My 99 K2500 Suburban.Meanwhile, when I dropped the springs, I spread my spring center pins away from each other. I just cut the stock perches off and...
-
-
Jman95 replied to the thread My 99 K2500 Suburban.Finished installing the knuckles. Then the hubs, brakes and cv axles.. Still waiting on my torsion bar relocators to come in...
-
-
Jman95 replied to the thread My 99 K2500 Suburban.I was worried about having “squeaky” lower control arm bushings.. So I installed a grease zerk for later. I believe I used a 13/64...
-
-
Jman95 replied to the thread My 99 K2500 Suburban.Got the transfer case installed. Installed water pump and coolant sensor. Replaced the upper control arm bushings with the press...
-
-
Jman95 replied to the thread My 99 K2500 Suburban.The kid in me couldn’t hold back the excitement so I had to put the headers on lol.. These are JBA stainless ceramic coated...
-
-
Jman95 replied to the thread My 99 K2500 Suburban.Measured clearance between the converter and flex plate with a feeler gauge per the instructions, I don’t remember the exact...
-
-
Jman95 replied to the thread My 99 K2500 Suburban.I appreciate it, it has been a long road for sure. Can’t wait to start this thing up!!
-
Jman95 replied to the thread My 99 K2500 Suburban.With the front axle installed and the crossmembers in, it was time for the engine. Took it off the stand and painted where I couldn’t...
-
-
Jman95 replied to the thread My 99 K2500 Suburban.Had to shave the front diff case due to the lift. This was needed to gain the proper clearance around the lower control arm pocket and...
-
-
Jman95 replied to the thread My 99 K2500 Suburban.Installed the engine mounts. (I ordered the bushing kit for the truck probably 3 years ago, they forgot 1 engine mount. Red was out of...
-
-
Jman95 replied to the thread My 99 K2500 Suburban.The valve covers didn’t blend in how I wanted, so being me.. Always doing too much.. Lower intake is installed, still waiting on...
-
-
Jman95 replied to the thread My 99 K2500 Suburban.I set the intake on it to get a sneak peek lol. Cleaned up and painted the mounts and brackets. The tedious stuff that most...
-
-
Jman95 replied to the thread My 99 K2500 Suburban.I was kicking around the idea of the old Chevy orange, but wanted to keep it simple. Got it all taped up, and cleaned up. Sprayed...
-
-
-
Loading…
-
Loading…
Members online
- Murphdawg19
- 99xcss4
- kmoto
- HotWheelsBurban
- lneese
- Black95stepside
- Parking lot mechanic
- termite
- Schurkey
- anthonycalderon376
- Idaho83815
- BigBlueWhale
- OldschoolPT
- 1998_K1500_Sub
- 98BlackSierra
- clean90454ss
- JDT212
- halcyoncmd
- JonnyWho
- JD 53
- Greatphilip
- fancyTBI
- Caman96
- Reaper52
- 95RCSB
- Suburbarn
- RSTHEREALONE832
- Cook83274
- srpember
- Isaac Porietis
- Taz72
- jgunne
- 95 Silverado
- 94GMCK1500
- thatguyHoBo
- BradHanks15
- 8lugthug25
- Johnny Hirt
- Drunkcanuk
- Ironroad9C1
- 98GMCK1500
- 0L94fan
- Supercharged111
- superrod29
- SomeTahoe
- 92nLong
- CFSkiwi
- alfadoc
- Anchor
- SIERRA2500TO3500