The Stupid Lowered Questions Thread

[sewlow]

No probs with mine & the 2" drop shaclkles. 4"? F'n nightnmare! 6", 7", no probs. Pinion angle built into the flip kit.

 

[1badgmc]

No probs with mine & the 2" drop shaclkles. 4"? F'n nightnmare! 6", 7", no probs. Pinion angle built into the flip kit.

^ This

 

[itzRagan]

I have 96 C2500 6 lug. What would I need for a 2/4 drop?


Sent from my iPhone using Tapatalk

 

[turner-zj]

I have a 96 C3500 that is way more truck then I need. If I swapped out the rear leafs to 2500 springs would it lower the rear of the truck any?

 

[ccreddell]

Maybe a couple inches, but mostly because the spring pack is thinner.

 

[turner-zj]

a couple inches would be great beacuse its really high in the back as it is.

 

[someotherguy]

Drop shackles way easier than replacing whole spring pack and will get you the couple inch drop you want. Cheap. Easy.

Richard

 

[turner-zj]

already installed drop shackles and its still too high, IMO. Was just thinking the 2500 spring pack would bring it down a little as well.

 

[Eds90shortbed]

I have a 90 rcsb and doing a 4 6 drop, if I use belltech spindles with 275 60 15's will I have rubbing issues without rolling lip? Any help appreciated, thanks

 

[drewcrew]

I have a 90 rcsb and doing a 4 6 drop, if I use belltech spindles with 275 60 15's will I have rubbing issues without rolling lip? Any help appreciated, thanks

Are you worried about the front or back wheels ?