SAS questions

[Jacob6Lug]

I have a 96 k1500, and I plan on doing a SAS on it. But I only want it about the height that a Rough Country or Zone IFS lift would give. What parts should I get to achieve that height. Thanks

 

[BowtieBrody]

How high of a lift? They offer a wide variety of lifts you know.

Seeing as how you'll probably get flamed, read up on this article. And bookmark it, there are tons of threads on here by reputable members who have tons of skills when it comes to fabrication like this.

http://www.gmt400.com/threads/sas-parts-checklist.24367/

 

[Jacob6Lug]

How high of a lift? They offer a wide variety of lifts you know.

Seeing as how you'll probably get flamed, read up on this article. And bookmark it, there are tons of threads on here by reputable members who have tons of skills when it comes to fabrication like this.

http://www.gmt400.com/threads/sas-parts-checklist.24367/

I was thinking about 6 inches.

 

[BowtieBrody]

I was thinking about 6 inches.

6 inches is about the ideal height for a Solid Axle Swap, which boils down to about a 3" spring hanger and stock 47" springs,
someone can correct me if I'm incorrect though,

 

[95Suburban]

I used the 2.5" brackets from sky and 4" lift springs and netted about 6.5 to 7"total lift.

Sent from my 831C using Tapatalk