loudandproud
OBS Enthusiast
xc_hide_links_from_guests_guests_error_hide_media
xc_hide_links_from_guests_guests_error_hide_media
Video is up for you guys like the details.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Somebody has welded beforeGot some more progress done.
Made flexible intercooler mounts that allow the intercooler to move a bit
Got turbo's chassis mounted
CFD checked my design. Its optimized around distribution rather than pressure drop. This is more effective in lowering Compressor work in my cycle calculations.
Got intercooler bottom half welded up.
Got HD clamps welded up to the compressor discharge.
Also I got two more valve covers made with the CORRECT hardener... so these will be about to be post cured in my curing oven im going to build.
Video with all the deets is here:
xc_hide_links_from_guests_guests_error_hide_media
xc_hide_links_from_guests_guests_error_hide_media
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach